Manufacturing Engineering: Faculty Publications (2015-2023)
About the Collection
Collection preserves publications by current and former faculty and staff.
Need Help?
Have a question about GS Commons? Need additional description, text alternatives, or captions for GS Commons resources? Contact us or request accessible formats (opens in new tab).
from 2023
Integrating Engineering Standards into Manufacturing Engineering Curriculum, Yue Zhang, Haijun Gong, and Lianjun Wu
from 2022
Robotic Manufacturing System for Unattended Machining and Inspection of Graphite Bipolar Flow Field Plates for Proton Exchange Membrane Fuel Cells, Vladimir Gurau and Ryan Kent
from 2020
Neural Network for Structural Health Monitoring With Combined Direct and Indirect Methods, Seyyed Pooya Hekmati Athar, Mohammad Taheri, Jameson Secrist, and Hossein Taheri
Design and Demonstration of Automated Technologies for the Fabrication and Testing of PEM Fuel Cell Systems, Vladimir Gurau, Daniel Cox, Devin C. Fowler, Matthew Carter, and Adedayo Ogunleke
Prediction of Performance Variation Caused by Manufacturing Tolerances and Defects in Gas Diffusion Electrodes of Phosphoric Acid (PA)–Doped Polybenzimidazole (PBI)-Based High-Temperature Proton Exchange Membrane Fuel Cells, Vladimir Gurau and Emory S. De Castro
Design of a Methanol Reformer for on-board Production of Hydrogen as Fuel for a 3kW High-temperature Proton Exchange Membrane Fuel Cell Power System, Vladimir Gurau, Adedayo Ogunleke, and F. Strickland
Ultrasonic evaluation of polymer additively manufactured parts for defect inspection and structural integrity assessment, Jinsun Lee, Mostafa Hasanian, Hossain Saboonchi, Maggie Baechle, Valery Godinez-Azcuaga, and Hossein Taheri
Carbon Footprint of Alternative Wood Product Retirement Strategies, Brian K. Thorn, Daniel Tomaszewski, and Andres L. Carrano
from 2019
Product Category Rule (PCR) Guidance: Wooden Pallets. Environmental Product Declaration (EPD) Requirements. UL 10003, Sevda Alanya-Rosenbaum, Richard Bergman, Andres L. Carrano, LeRoi Cochran, Brad Gething, and Laszlo Horvath
Detection of Pores in Additive Manufactured Parts by Near Field Response of Laser-Induced Ultrasound, Timothy A. Bigelow, Benjamin Schneider, and Hossein Taheri
NDE In-Process for Metal Parts Fabricated Using Powder Based Additive Manufacturing, Leonard J. Bond, Lucas W. Koester, and Hossein Taheri
Preparation of Carbon Encapsulated Core-Shell Fe@ CoFe2O4 Particles Through the Kirkendall Effect and Application as Advanced Anode Materials for Lithium-Ion Batteries, Chaoyu Duan, Fuliang Zhu, Mengqi Du, Yanshuang Meng, and Yue Zhang
A Simple Synthesis of Nitrogen-Sulfur Co-Doped Porous Carbon Using Ionic Liquids as Dopant for High Rate Performance Li-Ion Batteries, Mengqi Duan, Yanshuang Meng, Chen Wang, Chaoyu Duan, Fuliang Zhu, and Yue Zhang
Influence of Three-dimensional Features of a Woven-fabric Substrate on Benthic Algal Biomass Production, Joseph Ekong, David M. Blersch, Kamran Kardel, and Andres L. Carrano
Bridging the Gap between Automated Manufacturing of Fuel Cell Components and Robotic Assembly of Fuel Cell Stacks, Devin C. Fowler, Vladimir Gurau, and Daniel Cox
Micro-CT Evaluation of Defects in Ti-6Al-4V Parts Fabricated by Metal Additive Manufacturing, Haijun Gong, Venkata Karthik Nadimpalli, Khalid Rafi, Thomas Starr, and Brent Stucker
Comparison of Stainless Steel 316L Parts Made by FDM- and SLM-Based Additive Manufacturing Processes, Haijun Gong, Dean Snelling, Kamran Kardel, and Andres L. Carrano
Rheological Properties of Two Stainless Steel 316L Powders for Additive Manufacturing, Haijun Gong, Xiaodong Xing, and Hengfeng Gu
Impact Strength of 3D Printed Polyether-ether-ketone (PEEK), Haijun Gong, Xiaodong Xing, and Jan Nel
Engineering of bio-mimetic substratum topographies for enhanced early colonization of filamentous algae, Ali Khoshkhoo, Andres L. Carrano, David M. Blersch, and Kamran Kardel
Non-Destructive Evaluation of Additively Manufactured Metallic Parts: In-Situ and Post Deposition, Lucas W. Koester, Leonard J. Bond, Hossein Taheri, and Peter C. Collins
Acoustic Monitoring of Additive Manufacturing for Damage and Process Condition Determination, Lucas W. Koester, Hossein Taheri, Leonard J. Bond, and Eric J. Faierson
Intelligent Fault Diagnosis of Bearings Based on Energy Levels in Frequency Bands Using Wavelet and Support Vector Machines (SVM), Seyed Majid Yadavar Nikravesh, Hossein Rezaie, Margaret Kilpatrik, and Hossein Taheri
Graphite in Metallic Materials- Growths, Structures and Defects of Spheroidal Graphite in Ductile Iron, Jingjing Qing and Mingzhi Xu
Mechanical and Material Properties of Castings Produced via 3D Printed Molds, Dean Snelling, Christopher B. Williams, and Alan P. Druschitz
