Manufacturing Engineering: Faculty Publications (2015-2023)
About the Collection
Collection preserves publications by current and former faculty and staff.
Need Help?
Have a question about GS Commons? Need additional description, text alternatives, or captions for GS Commons resources? Contact us or request accessible formats (opens in new tab).
from 2017
Design and Manufacturing of High Surface Area 3D-Printed Media for Moving Bed Bioreactors for Wastewater Treatment, Olivia Elliott, Stephanie Gray, Michael McClay, Bakr Nassief, Ann Nunnelley, Eric Vogt, Joseph Ekong, Kamran Kardel, Ali Khoshkhoo, Gabriel Proaño, David M. Blersch, and Andres L. Carrano
Collision Measurements Using Digital Image Correlation Techniques, Hamid Ghaednia, Ozdes Cermik, Dan B. Marghitu, and Kamran Kardel
Influence of Small Particles Inclusion on Selective Laser Melting of Ti-6Al-4V Powder, Haijun Gong, J. J. S. Dilip, Li Yang, Chong Teng, and Brent Stucker
Influence of Small Particles Inclusion on Selective Laser Melting of Ti-6al-4v Powder, Haijun Gong, J. J.S. Dilip, Li Yang, Chong Teng, and Brent Stucker
Robotic Technologies for Proton Exchange Membrane Fuel Cell Assembly, Vladimir Gurau, Devin Fowler, and Daniel Cox
Experimental and Theoretical Modeling of Behavior of 3D-Printed Polymers Under Collision With a Rigid Rod, Kamran Kardel, Hamid Ghaednia, Andres L. Carrano, and Dan B. Marghitu
Enhanced Sustainability Benefits Through Scaling-Up Bioenergy Production From Terrestrial and Algae Feedstock, Amin Mirkouei and Kamran Kardel
Enhance Sustainability Benefits Through Scaling-Up Bioenergy Production From Terrestrial and Algae Feedstock, Amin Mirkouei and Kamran Kardel
The Effect of Arc-Based Direct Metal Energy Deposition on PBF Maraging Steel, Bishal Silwal, Christopher Gerdmann, Stephen Migues, Kamran Kardel, Shaowen Xu, and Andrew Durrence
Organic Solar Cell by Inkjet Printing—An Overview, Sharaf Sumaiya, Kamran Kardel, and Adel El-Shahat
A Review of Defect Modeling in Laser Material Processing, Chong Teng, Deepankar Pal, Haijun Gong, Kai Zeng, Kevin Briggs, Nachiket Patil, and Brent Stucker
from 2016
Single Track of Selective Laser Melting Ti-6Al-4V Powder on Support Structure, Haijun Gong, Chong Teng, Kai Zeng, Deepankar Pal, Brent Stucker, J. J.S. Dilip, Jack Beuth, and John J. Lewandowski
Simulating Melt Pool Shape and Lack of Fusion Porosity for Selective Laser Melting of Cobalt Chromium Components, Chong Teng, Haijun Gong, Attila Szabo, J. J.S. Dilip, Katy Ashby, Shanshan Zhang, Nachiket Patil, Deepankar Pal, and Brent Stucker
Design for Additively Manufactured Lightweight Structure: A Perspective, Li Yang, Ola L. A. Harrysson, Dennis Cormier, Harvey West, S. Zhang, Haijun Gong, and Brent Stucker
from 2015
Influence of Defects on Mechanical Properties of Ti-6Al-4V Components Produced by Selective Laser Melting and Electron Beam Melting, Haijun Gong, Khalid Rafi, Hengfeng Gu, Janaki Ram, Thomas Starr, and Brent Stucker
Effects of Powder Variation on the Microstructure and Tensile Strength of Ti6Al4V Parts Fabricated by Selective Laser Melting, Hengfeng Gu, Haijun Gong, J. J.S. Dilip, Deepankar Pal, Adam Hicks, Heather Doak, and Brent Stucker
Additive Manufacturing of Metal Cellular Structures: Design and Fabrication, Li Yang, Ola L. A. Harrysson, Dennis Cormier, Harvey West, Haijun Gong, and Brent Stucker
Comparison of 3DSIM Thermal Modelling of Selective Laser Melting Using New Dynamic Meshing Method to ANSYS, Kai Zheng, Deepankar Pal, Haijun Gong, Nachiket Patil, and Brent Stucker
