About this Collection
The publications archived in this Georgia Southern Commons collection are produced by the faculty of the Department of Manufacturing Engineering.
Faculty Research in Georgia Southern Commons
Georgia Southern University faculty members are eligible to showcase their research in GS Commons and to join the Expert Gallery hosted by the University Libraries. Their intellectual and creative works are accessible through galleries organized by College, Department, Research Center, and a customized SelectedWorks researcher profile.
We invite and encourage Georgia Southern faculty members to sign up to Join the Expert Gallery!
Publishing Information
GS Commons is an open-access digital repository. Copyright and licensing agreements for works published by GS Commons protect the author's rights while facilitating the sharing of research. The works in this gallery were originally published or presented under agreements with entities external to this repository. Records for each work provide the access permitted by the original copyright and licensing agreement. For additional access or questions about a work, please contact the authors or email the GS Commons team.
Submissions from 2023
Integrating Engineering Standards into Manufacturing Engineering Curriculum, Yue Zhang, Haijun Gong, and Lianjun Wu
Submissions from 2022
Robotic Manufacturing System for Unattended Machining and Inspection of Graphite Bipolar Flow Field Plates for Proton Exchange Membrane Fuel Cells, Vladimir Gurau and Ryan Kent
Submissions from 2020
Neural Network for Structural Health Monitoring With Combined Direct and Indirect Methods, Seyyed Pooya Hekmati Athar, Mohammad Taheri, Jameson Secrist, and Hossein Taheri
Design and Demonstration of Automated Technologies for the Fabrication and Testing of PEM Fuel Cell Systems, Vladimir Gurau, Daniel Cox, Devin C. Fowler, Matthew Carter, and Adedayo Ogunleke
Prediction of Performance Variation Caused by Manufacturing Tolerances and Defects in Gas Diffusion Electrodes of Phosphoric Acid (PA)–Doped Polybenzimidazole (PBI)-Based High-Temperature Proton Exchange Membrane Fuel Cells, Vladimir Gurau and Emory S. De Castro
Design of a Methanol Reformer for on-board Production of Hydrogen as Fuel for a 3kW High-temperature Proton Exchange Membrane Fuel Cell Power System, Vladimir Gurau, Adedayo Ogunleke, and F. Strickland
Ultrasonic evaluation of polymer additively manufactured parts for defect inspection and structural integrity assessment, Jinsun Lee, Mostafa Hasanian, Hossain Saboonchi, Maggie Baechle, Valery Godinez-Azcuaga, and Hossein Taheri
Carbon Footprint of Alternative Wood Product Retirement Strategies, Brian K. Thorn, Daniel Tomaszewski, and Andres L. Carrano
Submissions from 2019
Product Category Rule (PCR) Guidance: Wooden Pallets. Environmental Product Declaration (EPD) Requirements. UL 10003, Sevda Alanya-Rosenbaum, Richard Bergman, Andres L. Carrano, LeRoi Cochran, Brad Gething, and Laszlo Horvath
Detection of Pores in Additive Manufactured Parts by Near Field Response of Laser-Induced Ultrasound, Timothy A. Bigelow, Benjamin Schneider, and Hossein Taheri
NDE In-Process for Metal Parts Fabricated Using Powder Based Additive Manufacturing, Leonard J. Bond, Lucas W. Koester, and Hossein Taheri
Preparation of Carbon Encapsulated Core-Shell Fe@ CoFe2O4 Particles Through the Kirkendall Effect and Application as Advanced Anode Materials for Lithium-Ion Batteries, Chaoyu Duan, Fuliang Zhu, Mengqi Du, Yanshuang Meng, and Yue Zhang
A Simple Synthesis of Nitrogen-Sulfur Co-Doped Porous Carbon Using Ionic Liquids as Dopant for High Rate Performance Li-Ion Batteries, Mengqi Duan, Yanshuang Meng, Chen Wang, Chaoyu Duan, Fuliang Zhu, and Yue Zhang
Influence of Three-dimensional Features of a Woven-fabric Substrate on Benthic Algal Biomass Production, Joseph Ekong, David M. Blersch, Kamran Kardel, and Andres L. Carrano
Bridging the Gap between Automated Manufacturing of Fuel Cell Components and Robotic Assembly of Fuel Cell Stacks, Devin C. Fowler, Vladimir Gurau, and Daniel Cox
Micro-CT Evaluation of Defects in Ti-6Al-4V Parts Fabricated by Metal Additive Manufacturing, Haijun Gong, Venkata Karthik Nadimpalli, Khalid Rafi, Thomas Starr, and Brent Stucker
Comparison of Stainless Steel 316L Parts Made by FDM- and SLM-Based Additive Manufacturing Processes, Haijun Gong, Dean Snelling, Kamran Kardel, and Andres L. Carrano
Rheological Properties of Two Stainless Steel 316L Powders for Additive Manufacturing, Haijun Gong, Xiaodong Xing, and Hengfeng Gu
Impact Strength of 3D Printed Polyether-ether-ketone (PEEK), Haijun Gong, Xiaodong Xing, and Jan Nel
Engineering of bio-mimetic substratum topographies for enhanced early colonization of filamentous algae, Ali Khoshkhoo, Andres L. Carrano, David M. Blersch, and Kamran Kardel
Non-Destructive Evaluation of Additively Manufactured Metallic Parts: In-Situ and Post Deposition, Lucas W. Koester, Leonard J. Bond, Hossein Taheri, and Peter C. Collins
Acoustic Monitoring of Additive Manufacturing for Damage and Process Condition Determination, Lucas W. Koester, Hossein Taheri, Leonard J. Bond, and Eric J. Faierson
Intelligent Fault Diagnosis of Bearings Based on Energy Levels in Frequency Bands Using Wavelet and Support Vector Machines (SVM), Seyed Majid Yadavar Nikravesh, Hossein Rezaie, Margaret Kilpatrik, and Hossein Taheri
Graphite in Metallic Materials- Growths, Structures and Defects of Spheroidal Graphite in Ductile Iron, Jingjing Qing and Mingzhi Xu
Mechanical and Material Properties of Castings Produced via 3D Printed Molds, Dean Snelling, Christopher B. Williams, and Alan P. Druschitz
Nondestructive Ultrasonic Inspection of Composite Materials: A Comparative Advantage of Phased Array Ultrasonic, Hossein Taheri and Ahmed Arabi Hassen
Investigation of Nondestructive Testing Methods for Friction Stir Welding, Hossein Taheri, Margaret Kilpatrick, Matthew Norvalls, Warren J. Harper, Lucas W. Koester, Timothy A. Bigelow, and Leonard J. Bond
In Situ Additive Manufacturing Process Monitoring With an Acoustic Technique: Clustering Performance Evaluation Using K-Means Algorithm, Hossein Taheri, Lucas W. Koester, Timothy A. Bigelow, Eric J. Faierson, and Leonard J. Bond
Environmental and Economic Impacts of Preemptive Remanufacturing Policies for Block and Stringer Pallets, Fabiana Tornese, Jennifer A. Pazour, Brian K. Thorn, and Andres L. Carrano
Designing a Graphitic White Iron: Microstructures and Properties, Jie Wan, Jingjing Qing, and Mingzhi Xu
Designing a Novel Graphitic White Iron for Metal-to-Metal Wear Systems, Jie Wan, Jingjing Qing, and Mingzhi Xu
A Modular Twisted and Coiled Polymer Actuator Unit for Robotic Tentacles, Lianjun Wu and Xuemin Wang
Preparation of Co3O4/Nitrogen-Doped Carbon Composite by in Situ Solvothermal with Ionic Liquid and Its Electrochemical Performance as Lithium-Ion Battery Anode, Mingjun Xiao, Yanshuang Meng, Chaoyu Duan, Qianru Hu, Ruinian Li, Fuliang Zhu, and Yue Zhang
Modification of Residual Stresses in Laser Additive Manufactured AlSi10Mg Specimens Using an Ultrasonic Peening Technique, Xiaodong Xing, Xiaoming Duan, Xiaojing Sun, Haijun Gong, Liquan Wang, and Fengchun Jiang
Effect of Firing Temperature and Duration on Fused Silica Investment Shell Strength at Room Temperature, Mingzhi Xu and Jingjing Qing
Submissions from 2018
Integrated Electricity and Natural Gas Demand Response for Manufacturers in the Smart Grid, Fadwa Dababneh and Lin Li
Demand Response-Driven Production and Maintenance Decision-Making for Cost-Effective Manufacturing, Fadwa Dababneh, Lin Li, Rahul Shah, and Cliff Haefke
Carbon Modified Porous Scale-like γ-Fe2O3 as Anode for High Performance Li-ion Batteries, Chaoyu Duan, Yanshuang Meng, Mengqi Du, Lei Wang, and Yue Zhang
Nitrogen–Sulfur Co-Doped Porous Carbon Prepared Using Ionic Liquids as a Dual Heteroatom Source and Their Application for Li-Ion Batteries, Mengqi Duan, Yanshuang Meng, Chaoyu Duan, Chen Wang, Fuliang Zhu, and Yue Zhang
Chemistry and Properties of Medium-Mn Two-Stage TRIP Steels, Daniel M. Field, Jingjing Qing, and David C. Van Aken
A Measurement Tool for Circular Economy Practices: A Case Study in Pallet Supply Chains, Maria Grazia Gnoni, Fabiana Tornese, Brian K. Thorn, Andres L. Carrano, and Jennifer A. Pazour
Material Properties and Shrinkage of 3D Printing Parts Using Ultrafuse Stainless Steel 316LX Filament, Haijun Gong, Cameron Crater, Ana Ordonez, Craig Ward, Madison Waller, and Charles Ginn
Comparison of Stainless Steel 416L Parts Made by FDM-based and SLM-based Additive Manufacturing Processes, Haijun Gong, Dean Snelling, Kamran Kardel, and Andres L. Carrano
Custom Design of Substratum Topography Increases Biomass Yield in Algal Turf Scrubbers, Kamran Kardel, David M. Blersch, and Andres L. Carrano
Understanding Distortion in Material Jetting Processes, Kamran Kardel, Ali Khoshkhoo, and Andres L. Carrano
Effect of Build Orientation and Part Thickness on Dimensional Distortion in Material Jetting Processes, Ali Khoshkhoo, Andres L. Carrano, and David M. Blersch
Effect of Surface Slope and Build Orientation on Surface Finish and Dimensional Accuracy in Material Jetting Processes, Ali Khoshkhoo, Andres L. Carrano, and David M. Blersch
Understanding and Engineering of Natural Surfaces with Additive Manufacturing 3D-Printed Biosurfaces, Ali Khoshkhoo, Andres L. Carrano, David M. Blersch, Hamid Ghaednia, and Kamran Kardel
Non-Destructive Evaluation of Additively Manufactured Metallic Parts, Lucas W. Koester, Leonard J. Bond, Peter C. Collins, Hossein Taheri, and Timothy A. Bigelow
In-Situ Acoustic Emission Monitoring in Additive Manufacturing Processes, Lucas W. Koester, Hossein Taheri, Timothy A. Bigelow, Leonard J. Bond, and Eric J. Faierson
Nondestructive Testing for Parts Fabricated Using Additive Manufacturing, Lucas W. Koester, Hossein Taheri, Timothy A. Bigelow, Peter C. Collins, and Leonard J. Bond
Cost-Effective Supply Chain for Electric Vehicle Battery Remanufacturing, Lin Li, Fadwa Dababneh, and Jing Zhao
Pyrolysis Mechanism of Ionic Liquid Under Microwave Irradiation and the Formation of N-Doped Carbon, Yanshuang Meng, Lei Wang, Yue Zhang, Fuliang Zhu, and Dajian Wang
A Comparative Study on LiFePO4/C by In-Situ Coating with Different Carbon Sources for High-Performance Lithium Batteries, Yanshuang Meng, Jun Xia, Lei Wang, Gongrui Wang, Fuliang Zhu, and Yue Zhang
Onset of Nucleate Boiling Detection in a Boiler Tube by Wavelet Transformation of Vibration Signals, Seyed Majid Yadavar Nikravesh and Hossein Taheri
Characterizing Graphite Nodule in Ductile Iron using TKD and TEM, Jingjing Qing and Mingzhi Xu
Multidimensional Modelling of Organic Solar Cell, Sharaf Sumaiya, Adel El Shahat, and Kamran Kardel
Joint Energy, Maintenance, and Throughput Modeling for Sustainable Manufacturing Systems, Zeyi Sun, Fadwa Dababneh, and Lin Li
Finite Element Simulation and Experimental Verification of Ultrasonic Non-Destructive Inspection of Defects in Additively Manufactured Materials, Hossein Taheri, Lucas W. Koester, Timothy A. Bigelow, and Leonard J. Bond
Investigating the Environmental and Economic Impact of Loading Conditions and Repositioning Strategies for Pallet Pooling Providers, Fabiana Tornese, Jennifer A. Pazour, Brian K. Thorn, Debjit Roy, and Andres L. Carrano
Improving the Environmental Sustainability of Pallet Logistics through Preemptive Remanufacturing: An Integer Linear Optimization Model, Fabiana Tornese, Jennifer Pazour, Andres L. Carrano, and Brian K. Thorn
One Step Hydrothermal Synthesis of Flower-shaped Co 3 O 4 Nanorods on Nickel Foam as Supercapacitor Materials and Their Excellent Electrochemical Performance, Chen Wang, Yanshuang Meng, Lei Wang, Fuliang Zhu, and Yue Zhang
Co3O4/Carbon Nano-Onions Composite as Supercapacitor Electrode and Its Excellent Electrochemical Performance, Chen Wang, Fuliang Zhu, Gongrui Wang, Mingjun Xiao, Yanshuang Meng, and Yue Zhang
Developing a Graphitic White Cast Iron, Jie Wan, Jingjing Qing, and Mingzhi Xu
Inferring 3D Ellipsoids Based on Cross-Sectional Images with Applications to Porosity Control of Additive Manufacturing, Jianguo Wu, Yuan Yuan, Haijun Gong, and Tzu-Liang Tseng
In Situ Coating on LiFePO 4 with Ionic Liquid as Carbon Source for High-Performance Lithium Batteries, Jun Xia, Fuliang Zhu, Gongrui Wang, Yanshuang Meng, and Yue Zhang
Nitrogen Doped Porous Onion Carbon Derived from Ionic Liquids as the Anode Materials for Lithium Ion Batteries with High Performance, Mingjun Xiao, Yanshuang Meng, Chaoyu Duan, Fuliang Zhu, and Yue Zhang
In-Situ Reduction Derived Nitrogen Doped Carbon Anchored Cobalt Nanoparticles as Highly Capacity and Long Life Lithium Ion Battery Anodes, Mingjun Xiao, Yanshuang Meng, Gongrui Wang, Chaoyu Duan, Fuliang Zhu, and Yue Zhang
One-Step Synthesis of Co@C Composite as High-Performance Anode Material for Lithium-ion Batteries, Mingjun Xiao, Fuliang Zhu, Gongrui Wang, Chaoyu Duan, Yanshuang Meng, and Yue Zhang
Tensile Fatigue Behavior of Single Carbon Nanotube Yarns, Enlong Yang, Zhe Yu, Mahmoud Baniasadi, Salvador Moreno, Honglei Yi, Jiangtao Di, Ray Baughman, and Majid Minary-Jolandan
Submissions from 2017
Correlation of Annealing Temperature, Morphology, and Electro-Mechanical Properties of Electrospun Piezoelectric Nanofibers, Mahmoud Baniasadi, Zhe Xu, Jizhe Cai, Soheil Daryadel, Manuel Quevedo-Lopez, Mohammad Naraghi, and Majid Minary-Jolandan
Microscale 3D Printing of Nanotwinned Copper, Ali Behroozfar, Soheil Daryadel, S. Reza Morsali, Salvador Moreno, Mahmoud Baniasadi, Rodrigo A. Bernal, and Majid Minary-Jolandan
Customized 3D-Printed Surface Topography Governs Species Attachment Preferences in a Fresh Water Periphyton Community, David M. Blersch, Kamran Kardel, Andres L. Carrano, and Manjinder Kaur
Selected On-Demand Medical Applications of 3D-Printing for Long-Duration Manned Space Missions, Andres L. Carrano
Localized Pulsed Electrodeposition Process for Three-Dimensional Printing of Nanotwinned Metallic Nanostructures, Soheil Daryadel, Ali Behroozfar, S. Reza Morsali, Salvador Moreno, Mahmoud Baniasadi, Julia Bykova, Rodrigo A. Bernal, and Majid Minary-Jolandan
Design and Manufacturing of High Surface Area 3D-Printed Media for Moving Bed Bioreactors for Wastewater Treatment, Olivia Elliott, Stephanie Gray, Michael McClay, Bakr Nassief, Ann Nunnelley, Eric Vogt, Joseph Ekong, Kamran Kardel, Ali Khoshkhoo, Gabriel Proaño, David M. Blersch, and Andres L. Carrano
Collision Measurements Using Digital Image Correlation Techniques, Hamid Ghaednia, Ozdes Cermik, Dan B. Marghitu, and Kamran Kardel
Influence of Small Particles Inclusion on Selective Laser Melting of Ti-6Al-4V Powder, Haijun Gong, J. J. S. Dilip, Li Yang, Chong Teng, and Brent Stucker
Influence of Small Particles Inclusion on Selective Laser Melting of Ti-6al-4v Powder, Haijun Gong, J. J.S. Dilip, Li Yang, Chong Teng, and Brent Stucker
Robotic Technologies for Proton Exchange Membrane Fuel Cell Assembly, Vladimir Gurau, Devin Fowler, and Daniel Cox
Experimental and Theoretical Modeling of Behavior of 3D-Printed Polymers Under Collision With a Rigid Rod, Kamran Kardel, Hamid Ghaednia, Andres L. Carrano, and Dan B. Marghitu
Enhanced Sustainability Benefits Through Scaling-Up Bioenergy Production From Terrestrial and Algae Feedstock, Amin Mirkouei and Kamran Kardel
Enhance Sustainability Benefits Through Scaling-Up Bioenergy Production From Terrestrial and Algae Feedstock, Amin Mirkouei and Kamran Kardel
The Effect of Arc-Based Direct Metal Energy Deposition on PBF Maraging Steel, Bishal Silwal, Christopher Gerdmann, Stephen Migues, Kamran Kardel, Shaowen Xu, and Andrew Durrence
Organic Solar Cell by Inkjet Printing—An Overview, Sharaf Sumaiya, Kamran Kardel, and Adel El-Shahat
A Review of Defect Modeling in Laser Material Processing, Chong Teng, Deepankar Pal, Haijun Gong, Kai Zeng, Kevin Briggs, Nachiket Patil, and Brent Stucker
Submissions from 2016
Single Track of Selective Laser Melting Ti-6Al-4V Powder on Support Structure, Haijun Gong, Chong Teng, Kai Zeng, Deepankar Pal, Brent Stucker, J. J.S. Dilip, Jack Beuth, and John J. Lewandowski
Simulating Melt Pool Shape and Lack of Fusion Porosity for Selective Laser Melting of Cobalt Chromium Components, Chong Teng, Haijun Gong, Attila Szabo, J. J.S. Dilip, Katy Ashby, Shanshan Zhang, Nachiket Patil, Deepankar Pal, and Brent Stucker
Design for Additively Manufactured Lightweight Structure: A Perspective, Li Yang, Ola L. A. Harrysson, Dennis Cormier, Harvey West, S. Zhang, Haijun Gong, and Brent Stucker
Submissions from 2015
Influence of Defects on Mechanical Properties of Ti-6Al-4V Components Produced by Selective Laser Melting and Electron Beam Melting, Haijun Gong, Khalid Rafi, Hengfeng Gu, Janaki Ram, Thomas Starr, and Brent Stucker
Effects of Powder Variation on the Microstructure and Tensile Strength of Ti6Al4V Parts Fabricated by Selective Laser Melting, Hengfeng Gu, Haijun Gong, J. J.S. Dilip, Deepankar Pal, Adam Hicks, Heather Doak, and Brent Stucker
Additive Manufacturing of Metal Cellular Structures: Design and Fabrication, Li Yang, Ola L. A. Harrysson, Dennis Cormier, Harvey West, Haijun Gong, and Brent Stucker
Comparison of 3DSIM Thermal Modelling of Selective Laser Melting Using New Dynamic Meshing Method to ANSYS, Kai Zheng, Deepankar Pal, Haijun Gong, Nachiket Patil, and Brent Stucker
