Mechanical Engineering: Faculty Publications
About the Collection
Collection preserves publications by current and former faculty and staff.
Need Help?
Have a question about GS Commons? Need additional description, text alternatives, or captions for GS Commons resources? Contact us or request accessible formats (opens in new tab).
from 2015
Analysis of the Effectiveness of Modern Ballistic Resistant Materials Using Finite Element Techniques, Mosfequr Rahman, S. Cashwell, M. Dockery, Adam Chevalier, Adam Barlow, Bowen Jones, and Sirajus Salekeen
Finite Element Analysis of Various Design Projectiles as Bullet Models, Mosfequr Rahman, Steven Chrysosferidis, Sirajus Salekeen, Adam Chevalier, David Bell, Bowen Jones, and Adam Barlow
The Effects of Fin Geometry and Surface Area on the Overall Heat Flux of a Heat Sink While Experiencing Natural and Forced Convection, Mosfequr Rahman, C. Giddens, Travis E. Salyers, C. Herrington, C. Smith, and David M. Calamas
Optimization of Boom Design for Cubesat, Mosfequr Rahman, Philip C. Hines, T. Hedges, Kelsey Kaht, J. Segarra, C. Brower, and Aniruddha Mitra
Performance Analysis of Biologically Inspired Honeycomb Structured Heat Exchanger, Mosfequr Rahman, Sakib Iqbal, and David M. Calamas
Finite Element Analysis of Silica Aerogel to Be Used in High Temperature Insulation Tiles for next Generation Space Tiles, Mosfequr Rahman, J. Shaw, M. Roesel, B. William, J. Willis, Sirajus Salekeen, and M. Ahmed
Finite Element Analysis in Implementing Silica Aerogel in High-Temperature Reusable Insulation Tiles for Space Shuttle, Mosfequr Rahman, J. Shaw, M. Roesel, B. Williams, J. Willies, Bowen Jones, M. Ahmed, and Sirajus Salekeen
Performance of an IDI Engine Fueled with Fatty Acid Methyl Esters Formulated from Cotton Seeds Oil, Valentin Soloiu, Spencer Harp, Channing Watson, Martin Muinos, Sherwin Davoud, Gustavo Molina, Brian P. Koehler, Julia Heimberger, Marcis Jansons, and Christopher Butts
Investigation of RCCI Combustion with PFI of n-butanol and DI-ULSD compared with Binary Mixtures in an Omnivorous Diesel Engine, Valentin Soloiu and Gustavo J. Molina
Performance of an IDI Engine Fueled with Fatty Acid Methyl Esters Formulated from Cotton Seeds Oils, Valentin Soloiu and Gustavo J. Molina
Synthesis and Processing of Solution Spun Cellulose Acetate Fibers Reinforced with Carbon Nanotubes, Quazi Nahida Sultana, Saheem Absar, Stephanie Hulsey, Hans Schanz, and Mujibur R. Khan
Suspension Simulation Model Verification through Experimental Data for Lateral Force in Figure-8 Testing| Rabun Wallace, Rabun Wallace, Bikiran Guha, Michael Santangelo, Aniruddha Mitra, and Rami Haddad
Fabrication of Polyacrylonitrile Nanofiber Membranes Functionalized With Metal Organic Framework for CO2 Capturing, Wahiduz Zaman, Mujibur R. Khan, Saheem Absar, Spencer Harp, Kyle Edwards, and Nathan Takas
Parametric Studies of Coal Gasification in an Entrained- Flow Gasifier, Cheng Zhang, Kiel Schultheiss, Aniruddha Mitra, and Mosfequr Rahman
from 2014
Processing of Hybrid Nanocomposite High Performance Fibers (UHMWPE+NYLON 6+CNT+MAH) Using Solution Spinning Technique, Saheem Absar, Mujibur R. Khan, and Kyle Edwards
Electrospinning of Cisplatin-Loaded Cellulose Nanofibers for Cancer Drug Delivery, Saheem Absar, Mujibur R. Khan, Kyle Edwards, and David M. Calamas
An Assessment of an Innovative Student Response System on Student Learning and Performance, David M. Calamas
Performance of Thermally Radiating Fractal Extended Surfaces of Varying Cross-Section, David M. Calamas and Philip Hines
Enhanced Charge Carrier Concentration of SiC/CNT with N and P Type Doping Agents, Kyle Edwards, Mujibur R. Khan, Rafael Quirino, Brenda Beckler, and Saheem Absar
Stress Analysis of Various Shaped Blade of Savonius Wind Turbine, Jobaidur R. Khan and Mosfequr Rahman
A Study of Mechanical Behavior and Morphology of Carbon Nanotube Reinforced UHMWPE/Nylon 6 Hybrid Polymer Nanocomposite Fiber, Mujibur R. Khan, Hassan Mahfuz, Ashfaq Adnan, Theodora Leventouri, and Saheem Absar
In-Cylinder Wall Temperature Influence on Unburned Hydrocarbon Emissions During Transitional Period in an Optical Engine Using a Laser-Induced Phosphorescence Technique, Xi Lou, Xin Yu, Kan Zha, Marcis Jansons, and Valentin Soloiu
Tribological Effects of Nanofluids on Aluminum and Copper, Gustavo Molina, FNU Aktaruzzaman, Whitney Stregles, Valentin Soloiu, and Mosfequr Rahman
Jet-Impingement Effects of Alumina-Nanofluid on Aluminum and Copper, Gustavo J. Molina, Fnu Aktaruzzaman, Whitney Stregles, Valentin Soloiu, and Mosfequr Rahman
Wear Effects of Mineral-Oil Lubricant Dilution with Biofuels, Gustavo Molina, Valentin Soloiu, Mosfequr Rahman, S. M. Shanta, W. Powell, C. Watson, and Fnu Aktaruzzaman
