Robotic Manufacturing System for Unattended Machining and Inspection of Graphite Bipolar Flow Field Plates for Proton Exchange Membrane Fuel Cells, Vladimir Gurau, Ryan Kent
Department of Manufacturing Engineering Faculty Research and Publications

Design of a Methanol Reformer for on-board Production of Hydrogen as Fuel for a 3kW High-temperature Proton Exchange Membrane Fuel Cell Power System, Vladimir Gurau, Adedayo Ogunleke, F. Strickland
Vladimir Gurau

Prediction of Performance Variation Caused by Manufacturing Tolerances and Defects in Gas Diffusion Electrodes of Phosphoric Acid (PA)–Doped Polybenzimidazole (PBI)-Based High-Temperature Proton Exchange Membrane Fuel Cells, Vladimir Gurau, Emory S. De Castro
Vladimir Gurau

Design and Demonstration of Automated Technologies for the Fabrication and Testing of PEM Fuel Cell Systems, Vladimir Gurau, Daniel Cox, Devin C. Fowler, Matthew Carter, Adedayo Ogunleke
Vladimir Gurau

Bridging the Gap between Automated Manufacturing of Fuel Cell Components and Robotic Assembly of Fuel Cell Stacks, Devin C. Fowler, Vladimir Gurau, Daniel Cox
Vladimir Gurau

Design and Demonstration of Automated Technologies for the Fabrication and Testing of PEM Fuel Cell Systems, Vladimir Gurau
Vladimir Gurau

Design of a Methanol Reformer for on-board Production of Hydrogen as Fuel for a 3kW High-temperature Proton Exchange Membrane Fuel Cell Power System, Vladimir Gurau, Adedayo Ogunleke, F. Strickland
Department of Manufacturing Engineering Faculty Research and Publications

Design and Demonstration of Automated Technologies for the Fabrication and Testing of PEM Fuel Cell Systems, Vladimir Gurau, Daniel Cox, Devin C. Fowler, Matthew Carter, Adedayo Ogunleke
Department of Manufacturing Engineering Faculty Research and Publications

Prediction of Performance Variation Caused by Manufacturing Tolerances and Defects in Gas Diffusion Electrodes of Phosphoric Acid (PA)–Doped Polybenzimidazole (PBI)-Based High-Temperature Proton Exchange Membrane Fuel Cells, Vladimir Gurau, Emory S. De Castro
Department of Manufacturing Engineering Faculty Research and Publications

Design and Demonstration of Automated Technologies for the Fabrication and Testing of PEM Fuel Cell Systems, Vladimir Gurau
Department of Manufacturing Engineering Faculty Presentations

Bridging the Gap between Automated Manufacturing of Fuel Cell Components and Robotic Assembly of Fuel Cell Stacks, Devin C. Fowler, Vladimir Gurau, Daniel Cox
Department of Manufacturing Engineering Faculty Research and Publications

Green and Alternative Program in Engineering Technology, Vladimir Gurau
Vladimir Gurau

Further Improvements of an End-Effector for Robotic Assembly of Polymer Electrolyte Membrane Fuel Cells, Vladimir Gurau, Terri Armstrong-Koch
Vladimir Gurau

Robotic Fuel Cell Assembly System, Vladimir Gurau
Vladimir Gurau

Investigation of a Manufacturing Process for Intermediate to Mass Production of Polymer Graphite Based Bipolar Plates for Proton Exchange Membrane Fuel Cells, Vladimir Gurau
Vladimir Gurau

Demonstration of an Automated Assembly Process for Proton Exchange Membrane Fuel Cells Using Robotic Technology, Vladimir Gurau
Vladimir Gurau

Demonstration of an Automated Assembly Process for Proton Exchange Membrane Fuel Cells Using Robotic Technology, Vladimir Gurau
Vladimir Gurau

Investigation of a Manufacturing Process for Intermediate to Mass Production of Polymer/Graphite-Based Bipolar Plates for Proton Exchange Membrane Fuel Cells, Vladimir Gurau
Vladimir Gurau

Robotic Arm for Automated Assembly of Proton Exchange Membrane Fuel Cell Stacks, Michael Williams, Kenneth Tignor, Luke Sigler, Chitra Rajagopal, Vladimir Gurau
Vladimir Gurau

Compression Molding of Graphite-Based Bipolar Plates for Proton Exchange Membrane Fuel Cells, Vladimir Gurau, J. Miller, J. Ripple, J. Baker
Vladimir Gurau

Fuel cell system with flow field capable of removing liquid water from the high-pressure channels, Vladimir Gurau, Christine Zawodzinski, Tom Zawodzinski, Jesse Wainright
Vladimir Gurau

Robotic Arm for PEM Fuel Cell Assembly, Vladimir Gurau, Kenneth Tignor, W. Newton, A. Milarcik, G. Williamson, G. Bales, A. Swick, K. Fox, L. Siegler, C. Sayre, M. Williams, C. Rajagopal
Vladimir Gurau

Technique for Characterization of the Wettability Properties of Thin Gas Diffusion Media for Proton Exchange Membrane Fuel Cells, Vladimir Gurau, J. Adin Mann Jr.
Vladimir Gurau

Water Transport in the Ionomer-Phase and Across its Interfaces in Catalyst Coated Membranes for Proton Exchange Membrane Fuel Cells, Vladimir Gurau, J. Adin Mann
Vladimir Gurau

Effect of Interfacial Phenomena at the Gas Diffusion Layer-Channel Interface on the Water Evolution in a PEM Fuel Cell, Vladimir Gurau, J. Adin Mann Jr.
Vladimir Gurau

A Continuum Model for Water Transport in the Ionomer-Phase of Catalyst Coated Membranes for PEMFCs, Vladimir Gurau, J. Adin Mann Jr.
Vladimir Gurau

Spatiotemporal Behavior and Two-Phase Transport in Porous Electrodes of PEM Fuel Cells, Vladimir Gurau, Tom Zawodzinski, J. Adin Mann
Vladimir Gurau

Spatiotemporal Behavior of Water and Two-Phase Transport in the Porous Electrodes for PEM Fuel Cells, Vladimir Gurau, Thomas A. Zawodzinski, J. Adin Mann
Vladimir Gurau

Response to “Comment on ‘A Look at the Multiphase Mixture Model for PEM Fuel Cell Simulations'", Vladimir Gurau
Vladimir Gurau

A Critical Overview of Computational Fluid Dynamics Multiphase Models for Proton Exchange Membrane Fuel Cells, Vladimir Gurau, J. Adin Mann Jr.
Vladimir Gurau

In-Situ Characterization of GRAFCELL® Flexible Graphite Film as Gas Diffusion Layers for PEMFCs, Vladimir Gurau, Tom Zawodzinski, Ryan J. Wayne
Vladimir Gurau

Effect of the GDL Degradation on its Transport Properties, Vladimir Gurau, J. Adin Mann, Tom Zawodzinski, J. Larson, M. Hicks
Vladimir Gurau

A Look at the Multiphase Mixture Model for PEM Fuel Cell Simulations, Vladimir Gurau, Robert Edwards, J. Adin Mann Jr., Tom Zawodzinski
Vladimir Gurau

Measurement of Surface Properties of Gas Diffusion Layers to Improve Water management in PEM Fuel Cells, Vladimir Gurau, M. Hoorfar, H. Najjaran, J. Adin Mann
Vladimir Gurau

In-Situ Characterization of GrafTech Materials for Cathode GDLs of PEMFCs, Vladimir Gurau
Vladimir Gurau

Characterization of Transport Properties in Gas Diffusion Layers for Proton Exchange Membrane Fuel Cells; 2. Absolute Permeability, Vladimir Gurau, Michael Bluemle, Emory S. De Castro, Yu-Min Tsou, Thomas A. Zawodzinski, J. Adin Mann Jr.
Vladimir Gurau

Characterization of Transport Properties in Gas Diffusion Layers for Proton Exchange Membrane Fuel Cells; 1. Wettability (Internal Contact Angle to Water and Surface Energy of GDL Fibers), Vladimir Gurau, Michael Bluemle, Emory S. De Castro, Yu-Min Tsou, J. Adin Mann Jr., Thomas A. Zawodzinski
Vladimir Gurau

Numerical Investigation of Water Transport in the PEMFC Components, Vladimir Gurau, J. Adin Mann, Tom Zawodzinski
Vladimir Gurau

Numerical Investigation of Water Transport in the PEMFC Components, Vladimir Gurau, J. Adin Mann, Tom Zawodzinski
Vladimir Gurau

Two-Phase Transport In PEM Fuel Cell Cathodes, Vladimir Gurau, Tom Zawodzinski, J. Adin Mann
Vladimir Gurau

Characterization, Test and Evaluation of Gas Diffusion Layers for PEM Fuel Cells, Vladimir Gurau, Tom Zawodzinski, J. Adin Mann
Vladimir Gurau

Permeability and Wettability Measurements for Gas Diffusion Layers for PEM Fuel Cells, Vladimir Gurau, Michael Bluemle, J. Adin Mann Jr., Tom Zawodzinski, Emory S. De Castro, Y. M. Tsou
Vladimir Gurau

CFD Model for Reformate Operating Fuel Cell, Vladimir Gurau, T. Greszler, Tom Zawodzinski
Vladimir Gurau

Characterization of Transport Properties in Gas Diffusion Layers for PEMFCs, Vladimir Gurau, Michael Bluemle, Emory S. De Castro, Yu-Min Tsou, J. Adin Mann, Tom Zawodzinski
Vladimir Gurau

Characterization of Transport Properties in Gas Diffusion Layers for PEMFCs, Vladimir Gurau, Michael Bluemle, J. Adin Mann, Tom Zawodzinski, Emory S. De Castro, Yu-Min Tsou
Vladimir Gurau

Fuel Cell Collector Plates With Improved Mass Transfer Channels, Vladimir Gurau, Frano Barbir, Jay Kevin Neutzler
Vladimir Gurau

Self-Humidifying Fuel Cell, Robert Kenneth Wynne, Jay Kevin Neutzler, Frano Barbir, Vladimir Gurau, Walter Edward Pierce III
Vladimir Gurau

Proton Exchange Membrane Fuel Cell Technology Development at FIU-HCET, Vladimir Gurau, R. Srivastava, D. Roelant, A. Ebadian
Vladimir Gurau

An Analytical Solution of a Half-Cell Model for PEM Fuel Cells, Vladimir Gurau, Frano Barbir, Hongtan Liu
Vladimir Gurau

Two-Dimensional Model for the Entire Sandwich of a PEM Fuel Cell, Vladimir Gurau, Frano Barbir, Hongtan Liu
Vladimir Gurau

Mathematical Model for Proton Exchange Membrane Fuel Cells, Vladimir Gurau, Sadik Kakac, Hongtan Liu
Vladimir Gurau

Two Dimensional Mathematical Model for Proton Exchange Membrane Fuel Cells, Vladimir Gurau, Hongtan Liu, Sadik Kakac
Vladimir Gurau

Mathematical Model for Proton Exchange Membrane Fuel Cells, Vladimir Gurau, Hongtan Liu, Sadik Kakac
Vladimir Gurau

2-D, Non-Isothermal Mathematical Model and Performance Analysis of an Oxygen-Hydrogen PEM Fuel Cell, Vladimir Gurau
Vladimir Gurau