Numerical Investigation of Novel Design of Savonius Blade Geometries for Vertical-Axis Wind Turbines
Sirajus Salekeen
Part of the Mechanical Engineering Commons
Works by Mosfequr Rahman in Mechanical Engineering
2020
Wind Tunnel Testing and Numerical Simulation on Aerodynamic Performance of a Three Bladed Savonius Wind Turbine
Gustavo Molina
Computational Analysis of Laminar Forced Convection in Rectangular Enclosures of Different Aspect Ratios
Gustavo Molina
Development and Assessment of a New Flow-Through Test Instrument to Study Wear and Erosion Effects of Nanofluids
Gustavo Molina
Assessment of Surface Modifications from Interactions of Alumina-Nanofluids on Heat-Exchanger Materials
Gustavo Molina
Design and Development of Novel Test Instruments to Assess Tribological Effects of Nanofluids
Gustavo Molina
Assessment of the Wear Effects of Low- and High- Speed Jet Impingement of Alumina Nanofluids on Heat-Exchanger Materials
Gustavo Molina
Testing of Wear and Erosion Effects of Nanofluids on Metals: New Instruments and Assessment Methodologies
Gustavo Molina
Preliminary Experimental Study on Erosion and Tribological Effects of Selected Nanofluids
Gustavo Molina
Tribological Effects of Alumina-Nanofluids on Heat-Exchanger Materials: Assessment of Jet-Speed and Test-Time Factors
Gustavo Molina
Aerodynamic Performance and Vibration Analyses of Small Scale Horizontal Axis Wind Turbine with Various Number of Blades
Valentin Soloiu
Design and Testing of a Jet-Impingement Instrument to Study Surface-Modification Effects by Nanofluids
Valentin Soloiu
Assessment of Surface Modifications from Interactions of Alumina-Nanofluids on Heat-Exchanger Materials
Valentin Soloiu
Development and Assessment of a New Flow-Through Test Instrument to Study Wear and Erosion Effects of Nanofluids
Valentin Soloiu
Erosion-Corrosion Wear of Heat-Exchanger Materials by Water/ethylene-Glycol/alumina Nanofluids
Valentin Soloiu
Testing of Wear and Erosion Effects of Nanofluids on Metals: New Instruments and Assessment Methodologies
Valentin Soloiu
The Effect of Winglets on the Aircraft Wing Aerodynamics; Numerical Studies Using LES
Valentin Soloiu
Tribological Effects of Alumina-Nanofluids on Heat-Exchanger Materials: Assessment of Jet-Speed and Test-Time Factors
Valentin Soloiu
Design and Testing of a Jet-Impingement Instrument to Study Surface-Modification Effects by Nanofluids
Gustavo Molina
Erosion-Corrosion Wear of Heat-Exchanger Materials by Water/ethylene-Glycol/alumina Nanofluids
Gustavo Molina
Numerical Analysis of Laminar Natural Convection in Rectangular Enclosures of Different Aspect Ratios with and Without Aerosol Nanofluid
Gustavo Molina
On Adhesion Mechanisms and Erosions Effects of Nanoparticle-Suspensions (Nanofluids) on Cooling System Materials
Gustavo Molina
Numerical Study of Laminar Natural Convection in Square to Shallow Enclosures: Effects of Temperature Gradient and Heat Source
Gustavo Molina
Computational Analysis of Laminar Natural Convection in Rectangular Enclosures of Different Aspect Ratios with Different Heating Conditions
Gustavo Molina
2019
Aerodynamic Performance and Vibration Analyses of Small Scale Horizontal Axis Wind Turbine with Various Number of Blades
Marcel Ilie
2018
Testing of Wear and Erosion Effects of Nanofluids on Metals: New Instruments and Assessment Methodologies
Department of Mechanical Engineering Faculty Publications
2017
Wear Effects Assessment of Alumina Nanofluids in a Through-Flow Test-Rig
Department of Mechanical Engineering Faculty Publications
2016
Tribological Effects of Alumina-Nanofluids on Heat-Exchanger Materials: Assessment of Jet-Speed and Test-Time Factors
Department of Mechanical Engineering Faculty Publications
Experimental Investigation of Temperature Dependent Thermal Conductivity of Aluminum Oxide and CNT Heat Transfer Fluids
David Calamas
Finite Element Analysis in Implementing Silica Aerogel in High-Temperature Reusable Insulation Tiles for Space Shuttle
Sirajus Salekeen
Fabrication of Polyurethane Based Fabric Composite Shaft and its Experimental Study Under Triple Point Bending
Sirajus Salekeen
Analysis of the Effectiveness of Modern Ballistic Resistant Materials Using Finite Element Techniques
Sirajus Salekeen
Finite Element Analysis of Polyurethane Based Composite Shafts Under Different Boundary Conditions
Aniruddha Mitra
Fabrication of Polyurethane Based Fabric Composite Shaft and its Experimental Study Under Triple Point Bending
Aniruddha Mitra
Experimental Investigation and Finite Element Modeling Analysis of Photostrictive Optical Actuators
Aniruddha Mitra
Design and Development of Novel Test Instruments to Assess Tribological Effects of Nanofluids
Department of Mechanical Engineering Faculty Publications
Experimental Investigation and Finite Element Modeling Analysis of Photostrictive Optical Actuators
Mosfequr Rahman
Wind Tunnel Testing and Numerical Simulation on Aerodynamic Performance of a Three Bladed Savonius Wind Turbine
Mosfequr Rahman
Preliminary Experimental Study on Erosion and Tribological Effects of Selected Nanofluids
Mosfequr Rahman
Assessment of the Wear Effects of Low- and High- Speed Jet Impingement of Alumina Nanofluids on Heat-Exchanger Materials
Mosfequr Rahman
Analysis of the Effectiveness of Modern Ballistic Resistant Materials Using Finite Element Techniques
Mosfequr Rahman
Computational Analysis of Laminar Forced Convection in Rectangular Enclosures of Different Aspect Ratios
Mosfequr Rahman
Aerodynamic Performance Analysis of Three Bladed Savonius Wind Turbine with Different Overlap Ratios and at Various Reynolds Number
Mosfequr Rahman
A Proper Constitutive Model for Numerical Analysis of Lightweight Membrane Structures
Mosfequr Rahman
Finite Element Modeling Analysis of Photostrictively-Driven Optical Actuators for Excitation of Microdevices
Mosfequr Rahman
Numerical Study of Laminar Natural Convection in Square to Shallow Enclosures: Effects of Temperature Gradient and Heat Source
Mosfequr Rahman
Finite Element Analysis in Implementing Silica Aerogel in High-Temperature Reusable Insulation Tiles for Space Shuttle
Mosfequr Rahman
Effect of Ply Stacking Sequence on Structural Response of Symmetric Composite Laminates
Mosfequr Rahman
Finite Element Modeling Analysis of Photostrictive Materials use in Optical Actuator for Microdevices
Mosfequr Rahman
Finite Element Analysis of a Hobie 16 Mast and Possible Alternatives for Improvement
Mosfequr Rahman
Fabrication of Polyurethane Based Fabric Composite Shaft and its Experimental Study Under Triple Point Bending
Mosfequr Rahman
Finite Element Analysis of Prosthetic Running Blades using Different Composite Materials to Optimize Performance
Mosfequr Rahman
Computational Studies on the Flow Field of Various Shapes-Bladed Vertical Axis Savonius Turbine in Static Condition
Mosfequr Rahman
Finite Element Modeling of Structural Design Optimization of Various Vertical Axis Wind Turbine Models
Mosfequr Rahman
Experimental and Numerical Investigation on Vertical Axis Wind Turbine in Search for an Efficient Design
Mosfequr Rahman
Numerical Analysis of Laminar Natural Convection and Particle Transport in Rectangular Enclosures of Various Aspect Ratios
Mosfequr Rahman
Finite Element Analysis of Polyurethane Based Composite Shafts Under Different Boundary Conditions
Mosfequr Rahman
The Effects of Fin Geometry and Surface Area on the Overall Heat Flux of a Heat Sink While Experiencing Natural and Forced Convection
Mosfequr Rahman
Computational Analysis of Laminar Natural Convection in Rectangular Enclosures of Different Aspect Ratios with Different Heating Conditions
Mosfequr Rahman
Numerical Analysis of Laminar Natural Convection in Rectangular Enclosures of Different Aspect Ratios with and Without Aerosol Nanofluid
Mosfequr Rahman
On Adhesion Mechanisms and Erosions Effects of Nanoparticle-Suspensions (Nanofluids) on Cooling System Materials
Mosfequr Rahman
Numerical Analysis of Laminar Natural Convection in Rectangular Enclosures of Different Aspect Ratios with and Without Aerosol Nanofluid
Valentin Soloiu
Computational Analysis of Laminar Natural Convection in Rectangular Enclosures of Different Aspect Ratios with Different Heating Conditions
Valentin Soloiu
Computational Analysis of Laminar Forced Convection in Rectangular Enclosures of Different Aspect Ratios
Valentin Soloiu
Numerical Study of Laminar Natural Convection in Square to Shallow Enclosures: Effects of Temperature Gradient and Heat Source
Valentin Soloiu
Preliminary Experimental Study on Erosion and Tribological Effects of Selected Nanofluids
Valentin Soloiu
On Adhesion Mechanisms and Erosions Effects of Nanoparticle-Suspensions (Nanofluids) on Cooling System Materials
Valentin Soloiu
Assessment of the Wear Effects of Low- and High- Speed Jet Impingement of Alumina Nanofluids on Heat-Exchanger Materials
Valentin Soloiu
Experimental and Numerical Investigation on Vertical Axis Wind Turbine in Search for an Efficient Design
Valentin Soloiu
2015
Assessment of Surface Modifications from Interactions of Alumina-Nanofluids on Heat-Exchanger Materials
Department of Mechanical Engineering Faculty Publications
2014
Finite Element Modeling of Structural Design Optimization of Various Vertical Axis Wind Turbine Models
Mosfequr Rahman
2013
2012
Experimental Investigation and Finite Element Modeling Analysis of Photostictive Optical Actuators
Aniruddha Mitra
Fabrication of Polyurethane based Fabric Composite Shaft and its Experimental Study under Triple Point Bending
Mosfequr Rahman
Experimental Investigation and Finite Element Modeling Analysis of Photostictive Optical Actuators
Mosfequr Rahman
Fabrication of Polyurethane based Fabric Composite Shaft and its Experimental Study under Triple Point Bending
Aniruddha Mitra
Experimental Investigation on Photostrictively Driven Optical Actuators
Department of Mechanical Engineering Faculty Publications
Numerical Study of Laminar Natural Convection in Square to Shallow Enclosures: Effects of Temperature Gradient and Heat Source
Mosfequr Rahman
Erosion Effects of Nanofluids on Selected Cooling-System Materials
Department of Mechanical Engineering Faculty Publications
2011
Experimental Investigation on the Use of Photostrictive Optical Actuator for MEMS Devices and Verification with the FEA Modeling Results
Mosfequr Rahman
Preliminary Experimental Study on Erosion and Tribological Effects of Selected Nanofluids
Department of Mechanical Engineering Faculty Publications
2010
Aerodynamic Performance Analysis of Three Bladed Savonius Wind Turbine with Different Overlap Ratios and at various Reynolds Number
Mosfequr Rahman
A Proper Constitutive Model for Numerical Analysis of Lightweight Membrane Structures
Mosfequr Rahman
Numerical and Wind Tunnel Investigation on Aerodynamic Coefficients of a Three Bladed Savonius Wind Turbine with and without Overlap between Blades
Mosfequr Rahman
Finite Element Modeling Analysis of Photostrictive Materials use in Optical Actuator for Microdevices
Mosfequr Rahman
Numerical Analysis of Laminar Natural Convection and Particle Transport in Rectangular Enclosures of Various Aspect Ratios
Mosfequr Rahman
Numerical Analysis of Laminar Natural Convection and Particle Transport in Rectangular Enclosures of Various Aspect Ratios
Department of Mechanical Engineering Faculty Publications