Cycle Time Reduction in Additive Manufacturing using Peltier Thermoelectric Cooling Devices, Trevor Carlton
Honors College Theses

A Proof-of-Concept Study for an Elastohydrodynamic Seal Design, Cameron M. Stuart
Honors College Theses

Utilization of Machine Learning to Investigate Material State, Ana B. Abadie
Honors College Theses

Steam Gasification of Biochar to Produce Hydrogen-rich Syngas, Nnamdi Ofuani
Honors College Theses

Implementation of Static RFID Landmarks in SLAM for Planogram Compliance, Brennan L. Drake
Honors College Theses

Structural Design and Fabrication of a Test Chamber to Test PPEs for Effective Particle Filtration, Matthew G. Adharsingh
Honors College Theses

Enhancing Traffic Safety in Unpredicted Environments with Integration of ADAS Features with Sensor Fusion in Intelligent Electric Vehicle Platform with Implementation of Environmental Mapping Technology, David S. Obando Ortegon
Electronic Theses and Dissertations

Experimental and Numerical Investigation of Combustion and Emissions Characteristics in a Drone Jet Engine Fueled with Jet-A, Valentin Soloiu, John William McAfee, Marcel Ilie, Cesar Carapia, Amanda Weave, Austin Brant
Department of Mechanical Engineering Faculty Publications

Aeroelastic Phenomena of Fixed-Wing Aircraft with Wingtip Devices in Transonic and Supersonic Flight, John C. Havenar
Honors College Theses

Synthesis and Characterization of Hybrid Catalysts for Fischer-Tropsch Jet Fuel Production, Jack M. Steinagel
Honors College Theses

Robotic Manufacturing System for Unattended Machining and Inspection of Graphite Bipolar Flow Field Plates for Proton Exchange Membrane Fuel Cells, Vladimir Gurau, Ryan Kent
Department of Manufacturing Engineering Faculty Research and Publications

A magnetorheological flap valve micropump for drug delivery applications, Sevki Cesmeci, Rubayet Hassan, Mahmoud Baniasadi, Anthony G. Palacio
Sevki Cesmeci

Experimental Study of Thermopower of SWCNTs and SiC Nanoparticles with B-P (Born-Phosphorus) Sol-Gel Diffusion, Mujibur R. Khan, Saheem Absar, Kyle Edwards, Onasis Garcia, Rafael L. Quirino
Rafael L. Quirino

Enhanced Charge Carrier Concentration of SiC/CNT with N and P Type Doping Agents, Kyle Edwards, Mujibur R. Khan, Rafael Quirino, Brenda Beckler, Saheem Absar
Rafael L. Quirino

Influence of Three-dimensional Features of a Woven-fabric Substrate on Benthic Algal Biomass Production, Joseph Ekong, David M. Blersch, Kamran Kardel, Andres L. Carrano
Kamran Kardel

Jet engine emissions and vapor contrail reduction through increased combustion efficiency with the aim to mitigate greenhouse gases emissions, Austin J. Brant
Honors College Theses

Investigation of the Low-Temperature Combustion Phenomena of a Fischer-Tropsch Synthetic Aerospace Fuel in a Constant Volume Combustion Chamber for Greenhouse Gas Reduction, Lily H. Parker
Honors College Theses

Study of the Fracture of a Load Cell due to Impact Loading, Ashlyn B. Jackson
Honors College Theses

Structural Health Monitoring of Bioprinted Materials, Kathryn H. McIntosh
Honors College Theses

Effects of Varied Oxygen Levels, Laser Powers, and Scanning Speeds on Manufactured Components by Laser-Based Powder Bed Fusion, Amelia McNamee
Honors College Theses

Fiber Optic Acoustic Detection for Condition monitering, Micheal W. Jones, Suyen Quan
GS4 Georgia Southern Student Scholarship Symposium

Numerical and Experimental Analysis of an Elastohydrdynamic Seal For Gases, Mohammad Fuad Hassan
GS4 Georgia Southern Student Scholarship Symposium

Application of Phased Array Eddy Current (PAEC) Nondestructive Technology for Stress Corrosion Cracking (SCC), Cameron A. Jones
GS4 Georgia Southern Student Scholarship Symposium

A Quantitative Study of 3D Printing Filament Moisture Content in Humid Environment, Michael T. Runzi
GS4 Georgia Southern Student Scholarship Symposium

A Comparative Evaluation of Magnetorheological Micropump Designs for Drug Delivery Applications, Rubayet Hassan
GS4 Georgia Southern Student Scholarship Symposium

Frost Delay of a Water-Absorbing Surface with Engineered Wettability via Nonfreezing Water, Bishwash Shrestha, M. Amin Ezazi, Seyed Vahid Rad, Anjana Maharjan, Gibum Kwon
M.Amin Ezazi

Water-Responsive Self-Repairing Superomniphobic Surfaces via Regeneration of Hierarchical Topography, M. Amin Ezazi, Bishwash Shrestha, Anjana Maharjan, Gibum Kwon
M.Amin Ezazi

Controlled Voltage of Hot Snare Polypectomy Device in Electrosurgical Device, Saidi Olayinka Olalere
Electronic Theses and Dissertations

Analytical Modeling of a Novel Elastohydrodynamic Seal Design for Supercritical CO2 Power Cycles, Ikenna C. Ejiogu
Electronic Theses and Dissertations

CFD and Heat Transfer Analysis of Rocket Cooling Techniques on an Aerospike Nozzle, Geoffrey Sullivan
Electronic Theses and Dissertations

Determining Cause Of Failure For Load Cells Supporting Vertical Pressure Vessels Subject To Wind Loading, Seth Nowak
Electronic Theses and Dissertations

Fabrication and Testing of Carbon Fiber Reinforced Composites via Vat-Photopolymerization Additive Manufacturing, Anthony G. Palacio
Electronic Theses and Dissertations

Synthesis and Behavior of Mechanical and Optical Properties in Nano-Bacterial Cellulose Network Reinforced in PMMA Substrate, Guangheng Zhang
Electronic Theses and Dissertations

Numerical and Experimental Analysis of an Elastohydrodynamic Seal for Gases, Mohammad Fuad Hassan
Electronic Theses and Dissertations

Analysis of Bio-alcohols with Mie-scattering and LTC for Lowered Emissions in PCCI, Cesar E. Carapia
Electronic Theses and Dissertations

Magnetotheological Elastomeric Micropump Designs for Drug Delivery, Rubayet Hassan
Electronic Theses and Dissertations

Investigations of the Low Temperature Combustion Regions and Emissions Characteristics of Aerospace F24 in a Constant Volume Combustion Chamber and a Common Rail Direct Injection Ci Engine, Richard C. Smith III
Electronic Theses and Dissertations

An Innovative Elastohydrodynamic Seal Concept for Gases, Matthew J. DeMond
Electronic Theses and Dissertations

Effects of Titanium and Cerium Addition on Grain Size and Mechanical Properties of Ductile Iron Castings, Shelton F. Fowler IV
Electronic Theses and Dissertations

A Study of Reduced Activation Ferritic Martensitic Metal Core Wire for Wire Arc Additive Manufacturing, Alexander L. Reichenbach
Electronic Theses and Dissertations

INVESTIGATIONS OF THE NEGATIVE TEMPERATURE COEFFICIENT REGION OF SUSTAINABLE AVIATION FUELS FOR MITIGATION OF GLOBAL WARMING, Richard C. Smith III
Honors College Theses

Delamination-Free In-Air and Underwater Oil-Repellent Filters for Oil-Water Separation: Gravity-Driven and Cross-Flow Operations, Bishwash Shrestha, M. Amin Ezazi, Gibum Kwon
M.Amin Ezazi

Adsorption and on-Demand Desorption of Perfluoroalkyl Substances in Water By Thermo-Responsive Poly(N-isopropylmethacrylamide), M. Amin Ezazi, Bishwash Shrestha, Eden Surafel Taddese, Gibum Kwon
M.Amin Ezazi

Investigations of the Negative Temperature Coefcient Region of Sustainable Aviation Fuels for Mitigation of Global Warming, Richard C. Smith III
University Honors Symposium

Forming Cell Structures Using a Coaxial Spinneret and a Three-Dimensional Printer, Kaitlyn Antonick
University Honors Symposium

Door Actuator for an AVA Telepresence Robot Within A Plant Setting, Kaitlyn Antonick, Andrew Bishop, Brandon O'Brien, Chandler Barlow, Enrique Gonzalez, Eric Parnell, Hannah Potter, Joel McGregor, Jonah Akaose, Matthew Chan, Philip Akins, Preston Ciamillo, Stephon Cesar, Thomas Heusel, Thomas Snyder
Allen E. Paulson College of Engineering and Computing Industry Expo

Bobcat Skid-Steer Attachment for Drilling Pine Trees and Data Collecting, Payton Moss, Maddox Parrot, Joseph Kurey, Cade Durrence
Allen E. Paulson College of Engineering and Computing Industry Expo

3D Printed Dental/Medical Tools, Kaitlyn Antonick, Jalen Womack, Jordan Hughes, Brett Parmer, Michael Runzi
Allen E. Paulson College of Engineering and Computing Industry Expo

Tool Cart, William Freeman, Isaiah Schenk
Allen E. Paulson College of Engineering and Computing Industry Expo

B-17 Turret Mechanization, Christina Fisher, Carlos Garcia, Mirari Williams, Richard Smith, Sam Lowder, Matthew Culberson, Brody Grinnell, Alyssa Barton, Deondre Hill, Peter Strnad, Kishan Dave, Jamir Gardner, Brad Willis
Allen E. Paulson College of Engineering and Computing Industry Expo

Development and Fabrication of New Medical Retractor with Tubing Clamp for Neurosurgical Applications, Logan Sapp, Rayanne Taylor
Allen E. Paulson College of Engineering and Computing Industry Expo

B-17 Turret Automation - 1, Deborah Yussuf, Cameron Coriell, Troy Simm, Wyatt Leachman, Anthony Hewett, Caden Skipper, Kyle Clay, Matthew Musial, Duncan Adams, Cameron Turner, Jeremiah Barnett, Sam Hagler, Chase Lariscy, Richard "Chipper" Smith, Garrett Fox, Colton Settle, Cameron Perry
Allen E. Paulson College of Engineering and Computing Industry Expo

Post Processing Mount, Maggie Baechle-Clayton, Tony Crowder, Blake Heilman, Sam Odom, Garrett Windham
Allen E. Paulson College of Engineering and Computing Industry Expo

Legacy Equipment Upgrade, Richard Aviles, Manuel Cabrera, Matthew Gilchrist, Harris Tucker
Allen E. Paulson College of Engineering and Computing Industry Expo

B-17 Turret Automation - 2, Amelia McNamee, Christopher Wempner, Danyl Dickerson, Hailey Reeves, Hal Lenz, Jason Nguyen, Jesse Smith, Jonathan Randall, Kayla Dubose, McKenzie Woodward, Nate Widem, Noah Smith, Taveia Quinland, Wesley Richey, Zachary Fancher, Malik Marks, Julia Meadows
Allen E. Paulson College of Engineering and Computing Industry Expo

Three Degree of Motion Simulator Optimized for iRacing, Chris Workman, Brandon Sprivey, Ian Cowan, Max Ware, Benjamin Cipeu, Ryan Germany, Peter Camillo, Trevor Kasten, Jordan Floyd, Marcus Perez, Dziwodo Abotsi
Allen E. Paulson College of Engineering and Computing Industry Expo

Water Vapor-responsive Repairing Superomniphobic Surfaces With in Situ Recovery of Mechanical Properties, M. Amin Ezazi, Bishwash Shrestha, Anjana Maharjan, Gibum Kwon
M.Amin Ezazi

Mechanical Engineering News, Georgia Southern University
Mechanical Engineering News

Mechanical Engineering News, Georgia Southern University
Mechanical Engineering News

Controller Synthesis with the Consideration of MultiResolution, Marvin H.M. Cheng, Cheng-Yi Chen, Ezzat G. Bakhoum, Aniruddha Mitra
Aniruddha Mitra

Simulation of Frictional Effects Due to Engine Oil Contamination with Bio­Fuel, Julian Wallace, James Hennings, Aniruddha Mitra, Valentin Soloiu
Aniruddha Mitra

The Effect of Early Warning on the Overall Performance of the students in Mathematics Classes at East Georgia College Statesboro Center, Aditi Mitra, Aniruddha Mitra
Aniruddha Mitra

Synchronization Controller Synthesis of MultiAxis Motion System, Marvin H.M. Cheng, Anirudda Mitra, Cheng-Yi Chen
Aniruddha Mitra

FFT Analysis using LabView as a part of Vibration and Preventive Maintenance Class for Senior Level MET students, Aniruddha Mitra, Sahana Sen
Aniruddha Mitra

Effects of Variable Mix on Student Mathematics Performance, Gustavo J. Molina, George Clark, Aniruddha Mitra
Aniruddha Mitra

Introduction of Dynamics Laboratory in MET Program, Aniruddha Mitra
Aniruddha Mitra

Incorporating Finite Element Analysis in Mechanical Engineering Technology Program via Three Existing Courses and by Introducing a Senior Level Elective in the Curriculum, Aniruddha Mitra
Aniruddha Mitra

Mechanical Engineering News, Georgia Southern University
Mechanical Engineering News

Water-Responsive Self-Repairing Superomniphobic Surfaces via Regeneration of Hierarchical Topography, M. Amin Ezazi, Bishwash Shrestha, Anjana Maharjan, Gibum Kwon
M.Amin Ezazi

Mechanical Engineering News, Georgia Southern University
Mechanical Engineering News

Reversible adsorption and desorption of PFAS on inexpensive graphite adsorbents via alternating electric field, Bishwash Shrestha, M. Amin Ezazi, Sanjay Ajayan, Gibum Kwon
M.Amin Ezazi

Predicting Kinetics of Water-rich Permeate Flux Through Photocatalytic Mesh Under Visible Light Illumination, Bishwash Shrestha, M. Amin Ezazi, Seyed Vahid Rad, Gibum Kwon
M.Amin Ezazi

Humidity-driven self-repairing superomniphobic surfaces, M. Amin Ezazi
M.Amin Ezazi

LCST-driven catch-n-release of perfluoroalkyl substances (PFAS) from water: Remediation and sampling, M. Amin Ezazi, Bishwash Shrestha, Gibum Kwon
M.Amin Ezazi

Mechanical Engineering News, Georgia Southern University
Mechanical Engineering News

Lower Critical Solution Temperature-Driven Catch and Release of Perfluoroalkyl Substances from Water: Remediation and Sampling, M. Amin Ezazi, Bishwash Shrestha, Gibum Kwon
M.Amin Ezazi

Mechanical Engineering News, Georgia Southern University
Mechanical Engineering News

Design of a Methanol Reformer for on-board Production of Hydrogen as Fuel for a 3kW High-temperature Proton Exchange Membrane Fuel Cell Power System, Vladimir Gurau, Adedayo Ogunleke, F. Strickland
Vladimir Gurau

Prediction of Performance Variation Caused by Manufacturing Tolerances and Defects in Gas Diffusion Electrodes of Phosphoric Acid (PA)–Doped Polybenzimidazole (PBI)-Based High-Temperature Proton Exchange Membrane Fuel Cells, Vladimir Gurau, Emory S. De Castro
Vladimir Gurau

Design and Demonstration of Automated Technologies for the Fabrication and Testing of PEM Fuel Cell Systems, Vladimir Gurau, Daniel Cox, Devin C. Fowler, Matthew Carter, Adedayo Ogunleke
Vladimir Gurau

Bridging the Gap between Automated Manufacturing of Fuel Cell Components and Robotic Assembly of Fuel Cell Stacks, Devin C. Fowler, Vladimir Gurau, Daniel Cox
Vladimir Gurau

Design and Demonstration of Automated Technologies for the Fabrication and Testing of PEM Fuel Cell Systems, Vladimir Gurau
Vladimir Gurau

Mechanical Engineering News, Georgia Southern University
Mechanical Engineering News

Self-healing, omniphobic coatings and related methods, Bishwash Shrestha, M. Amin Ezazi, Gibum Kwon
M.Amin Ezazi

Mechanical Engineering News, Georgia Southern University
Mechanical Engineering News

Micro-CT Evaluation of Defects in Ti-6Al-4V Parts Fabricated by Metal Additive Manufacturing, Haijun Gong, Venkata Karthik Nadimpalli, Khalid Rafi, Thomas Starr, Brent Stucker
Haijun Gong

Rheological Properties of Two Stainless Steel 316L Powders for Additive Manufacturing, Haijun Gong, Xiaodong Xing, Hengfeng Gu
Haijun Gong

Impact Strength of 3D Printed Polyether-ether-ketone (PEEK), Haijun Gong, Xiaodong Xing, Jan Nel
Haijun Gong

Analysis of Vertical Pressure Vessels on Load Cells: Effect of Decreasing the Leg Length, Joseph Markowich
Honors College Theses

Cell Plasma Membrane Cholesterol as a Diagnostic, Li Li, Binyu Lu, Minchul Shin, Thomas J. Kelley, James D. Burgess
Li Li

Mechanical Engineering News, Georgia Southern University
Mechanical Engineering News

Engineered Nanoparticles with Decoupled Photocatalysis and Wettability for Membrane-Based Desalination and Separation of Oil-SalineWater Mixtures, Bishwash Shrestha, M. Amin Ezazi, Gibum Kwon
M.Amin Ezazi

Analysis of Data to Evaluate the Performance of Air Filters Used for Filtering Nanoscale Particles Generated by Smoke, Pascal J. Wagemaker
Honors College Theses

Multi-axial Measurement of Casting Wall Movement During SGI Solidification and Cooling in the Mold, Jacob Sapp
Honors College Theses

Mechanical Engineering News, Georgia Southern University
Mechanical Engineering News

Mechanical Engineering News, Georgia Southern University
Mechanical Engineering News

NZE Residential Test Facility analysis throughout summer/winter peak months for Thermal Comfort Prediction, Yearim Yang
Honors College Theses

The Effect of Fuel Injector Spacing, Angle, and Blowing Ratio on the Fuel Air Mixing Performance of a Scramjet Engine, Jonathan R. Copeland
University Honors Symposium

Analysis of Data to Evaluate the Performance of Air Filters Used for Filtering Nanoscale Particles Generated by Smoke, Pascal J. Wagemaker
University Honors Symposium

Climate Change Mitigation Technologies: Investigations into Sustainable Alternative Fuels in a Constant Volume Combustion Chamber, Lily Parker, Richard C. Smith III
University Honors Symposium

Analysis of Vertical Pressure Vessels: Effect of Decreasing Leg Length, Joseph Markowich
University Honors Symposium

Multi-axial Measurement of Casting Wall Movement During SGI Solidification and Cooling in the Mold, Jacob Sapp
University Honors Symposium

NZE Residential Test Facility Analysis throughout Summer/Winter Peak Months for Thermal Comfort Prediction, Yearim Yang
University Honors Symposium

Jet Engine Emissions and Vapor Contrail Reduction through Increased Combustion Efficiency with the Aim to Mitigate the Greenhouse Effect and the Emission of Greenhouse Gases, Austin Brant
University Honors Symposium

Structural Health Monitoring of Bioprinted Materials, Kathryn McIntosh
University Honors Symposium

Implementation of Multi Material and Geometries on the Frontal Crumpling Zone of Electric Vehicles to Improve Crashworthiness, Kyle M. Combs
University Honors Symposium

Modal Identification of Gelatinous Structure Using Vision-Based Vibrometry, Kenneth Nwagu
University Honors Symposium

Aircraft Runway Safe Navigation System, David S. Obando Ortegon
University Honors Symposium

Mechanical Engineering News, Georgia Southern University
Mechanical Engineering News

Mechanical Engineering News, Georgia Southern University
Mechanical Engineering News

Mechanical Engineering News, Georgia Southern University
Mechanical Engineering News

3D Printing Metal Lattice Structure Using Fused Deposition Modeling Process, Zezheng Wang
Electronic Theses and Dissertations

Quality Assurance of Lightweight Structures via Phase-based Motion Estimation, Ikenna E. Ifekaonwu
Electronic Theses and Dissertations

A Semi-Active Vibration Isolator For 3D Printing On Shipboard, Mohammad Z. Shahabuddin
Electronic Theses and Dissertations

Design and Development of Soft Earthworm Robot Driven by Fibrous Artificial Muscles, Beau Ragland
Electronic Theses and Dissertations

Haijun Gong,
Curricula Vitae for Faculty Researchers

Design of Compact Signal Distribution Device for Hoffman Reflex Methodologic Applications in Sports Medicine, Abayomi E. Folaranmi
Electronic Theses and Dissertations

Mechanical Properties of Nanomodified Hybrid GFRP Composite Materials, Micah Rop Kimutai
Electronic Theses and Dissertations

Experimental and Numerical Investigation of NACA Airfoil Wing with Winglets, Courtney Danielle Bachmann
Electronic Theses and Dissertations

Numerical and Experimental Analysis of Combustion and Emissions Characteristics of a Single-Stage Jet Engine Using Jet-A, Drake T. Grall
Electronic Theses and Dissertations

In-Situ Process Monitoring for Metal Additive Manufacturing (AM) Through Acoustic Technique, Md Shahjahan Hossain
Electronic Theses and Dissertations

The Development of a Holistic Quality Score Using In-Situ Monitoring of Laser Powder Bed Fusion, Ryan Daigneault
Electronic Theses and Dissertations

Reclamation of Fused Silica From Investment Shells Used for Casting Steel, Samuel L. Holt
Electronic Theses and Dissertations

Vladimir Gurau,
Curricula Vitae for Faculty Researchers

A Liquid Spring-Magnetorheological Damper System Under Combined Axial and Shear Loading for Three-Dimensional Seismic Isolation of Structures, Sevki Cesmeci, Faramarz Gordaninejad, Keri L. Ryan, Walaa Eltahawy
Sevki Cesmeci

Parameters Affecting Dynamics of 3-Dimensional Seismic Isolation, Walaa Eltahawy, Keri L. Ryan, Sevki Cesmeci, Faramarz Gordaninejad
Sevki Cesmeci

A Comprehensive Design Approach for a Fail-Safe, Magnetorheological-Based Isolation System for Three-Dimensional Seismic Isolation of Building Structures, Sevki Cesmeci, Faramarz Gordaninejad, Keri L. Ryan, Walaa Eltahawy
Sevki Cesmeci

Displacement/Velocity-Based Control of a Liquid Spring - MR Damper for Vertical Isolation, Walaa Eltahawy, Keri L. Ryan, Sevki Cesmeci, Faramarz Gordaninejad
Sevki Cesmeci

Mechanical Engineering News, Georgia Southern University
Mechanical Engineering News

Numerical Investigation of Novel Design of Savonius Blade Geometries for Vertical-Axis Wind Turbines, Mosfequr Rahman, Travis E. Salyers, Emile Maroha, Mahbub Ahmed, Sirajus Salekeen
Sirajus Salekeen

Mechanical Engineering News, Georgia Southern University
Mechanical Engineering News

Hydrogel with selective absorption for separation of liquid mixtures, Anjana Maharjan, M. Amin Ezazi, Gibum Kwon
M.Amin Ezazi

Study on the Viability of Preparing Plaster Molds for Rapid Prototyping of Complex Ceramic Parts using the Lost PLA Method, Shelton F. Fowler IV
Honors College Theses

Data Analysis to Evaluate the Performance of Breathing Masks used for Filtering Nano-Level Particles at Manufacturing Sites, Gracia M. Dardano
Honors College Theses

Drone Control Surfaces: A Piezoelectric Approach, Nicholas T. Jenkins
Honors College Theses

Data Analysis to Evaluate the Performance of Breathing Masks used for Filtering Nano-Level Particles at the Manufacturing Sites, Gracia Dardano Castro
University Honors Symposium

An Investigative Study of Combustion and Emissions with Noise and Vibrations of Synthetic Fuels within an Aero-Gas Turbine, Camille Phillips
University Honors Symposium

Dynamic Wind Loading Experimentation and Surface Imaging of Pressure Vessel Loadcell Fractures, Austin Sumner
University Honors Symposium

Examination of Gray Iron Flake Graphite and Austenite Growth Interactions During Early Stage Solidification, J. Chandler Liggett
University Honors Symposium

Thermally Sensitized Membranes for Crude Oil–water Remediation Under Visible Light, Talal F. Qahtan, Mohammed A. Gondal, Mohamed A. Dastageer, Gibum Kwon, M. Amin Ezazi, Mohammed Z. Al-Kuban
M.Amin Ezazi

Design of a Methanol Reformer for on-board Production of Hydrogen as Fuel for a 3kW High-temperature Proton Exchange Membrane Fuel Cell Power System, Vladimir Gurau, Adedayo Ogunleke, F. Strickland
Department of Manufacturing Engineering Faculty Research and Publications

Mechanical Engineering News, Georgia Southern University
Mechanical Engineering News

Mechanical Engineering News, Georgia Southern University
Mechanical Engineering News

Mechanical Engineering News, Georgia Southern University
Mechanical Engineering News

Mechanical Engineering News, Georgia Southern University
Mechanical Engineering News

Design and Demonstration of Automated Technologies for the Fabrication and Testing of PEM Fuel Cell Systems, Vladimir Gurau, Daniel Cox, Devin C. Fowler, Matthew Carter, Adedayo Ogunleke
Department of Manufacturing Engineering Faculty Research and Publications

A Study of the Efficiency and Effectiveness of the First Four Iterations of Sierpinski carpet Fractal-like Fins at Increasing Angles in Natural Convection, Sophia N. Fleri
Honors College Theses

Ultrasonic evaluation of polymer additively manufactured parts for defect inspection and structural integrity assessment, Jinsun Lee, Mostafa Hasanian, Hossain Saboonchi, Maggie Baechle, Valery Godinez-Azcuaga, Hossein Taheri
Hossein Taheri

Optimization and Design of Convergent-Divergent Rocket Nozzles, Jack Steinagel, Manuel Abadie
University Honors Symposium

Carbon Footprint of Alternative Wood Product Retirement Strategies, Brian K. Thorn, Daniel Tomaszewski, Andres L. Carrano
Department of Manufacturing Engineering Faculty Research and Publications

Carbon Footprint of Alternative Wood Product Retirement Strategies, Brian K. Thorn, Daniel Tomaszewski, Andres L. Carrano
Andres L. Carrano

Selective Wettability Membrane for Continuous Oil−Water Separation and In Situ Visible Light-Driven Photocatalytic Purification of Water, M. Amin Ezazi, Bishwash Shrestha, Sun-il Kim, Bora Jeong, Jerad Gorney, Katie Hutchison, Duck Hyun Lee, Gibum Kwon
M.Amin Ezazi

Ultrasonic evaluation of polymer additively manufactured parts for defect inspection and structural integrity assessment, Jinsun Lee, Mostafa Hasanian, Hossain Saboonchi, Maggie Baechle, Valery Godinez-Azcuaga, Hossein Taheri
Department of Manufacturing Engineering Faculty Research and Publications

Synthesis of oxygen functionalized carbon nanotubes and their application for selective catalytic reduction of NOx with NH3, Bora Ye, Sun-I Kim, Minwoo Lee, M. Amin Ezazi, Hong-Dae Kim, Gibum Kwon, Duck Hyun Lee
M.Amin Ezazi

Prediction of Performance Variation Caused by Manufacturing Tolerances and Defects in Gas Diffusion Electrodes of Phosphoric Acid (PA)–Doped Polybenzimidazole (PBI)-Based High-Temperature Proton Exchange Membrane Fuel Cells, Vladimir Gurau, Emory S. De Castro
Department of Manufacturing Engineering Faculty Research and Publications

Wind Tunnel Testing and Numerical Simulation on Aerodynamic Performance of a Three Bladed Savonius Wind Turbine, Khandakar Niaz Morshed, Mosfequr Rahman, Gustavo Molina, Mahbub Ahmed
Gustavo Molina

Poultry Fat FAME Biodiesel Blends Characteristics and Performance in an IDI Engine for APU Applications, Valentin Soloiu, Henry Ochieng, Martin Muinos, Alejandro Rivero-Castillo, James M. Lobue, Gustavo Molina, Brian Vlcek, Spencer Harp
Gustavo Molina

Combustion Analysis of Peanut FAME Blends in an IDI Engine and the Influence of its Primary Fatty Acid Components on the Fuel Characteristics, Valentin Soloiu, April Covington, J. Lewis, J. Weaver, Christopher Butts, B. Vlcek, Gustavo J. Molina
Gustavo Molina

Computational Analysis of Laminar Forced Convection in Rectangular Enclosures of Different Aspect Ratios, Mosfequr Rahman, A. Houdson, Gustavo Molina, Valentin Soloiu
Gustavo Molina

Development and Assessment of a New Flow-Through Test Instrument to Study Wear and Erosion Effects of Nanofluids, Gustavo J. Molina, Fnu Aktaruzzaman, Valentin Soloiu, Mosfequr Rahman, Kenshantis Martin
Gustavo Molina

Exploratory Research in Erosion Effects of Nanofluids on Metallic Materials, Gustavo Molina, Mosfequr Rahman, M. Hulett, Valentin Soloiu
Gustavo Molina

Assessment of Surface Modifications from Interactions of Alumina-Nanofluids on Heat-Exchanger Materials, Fnu Aktaruzzaman, Gustavo J. Molina, Valentin Soloiu, Mosfequr Rahman
Gustavo Molina

Design and Development of Novel Test Instruments to Assess Tribological Effects of Nanofluids, Gustavo J. Molina, Fnu Aktaruzzaman, Mosfequr Rahman, V. Soloiu
Gustavo Molina

Experimental Investigations on the Tribological Effects of Alumina-Nanofluids in a Through-Flow-Test-Rig, Fnu Aktaruzzaman, Gustavo J. Molina, Valentin Soloiu, M. Rahman
Gustavo Molina

A Study on Wear Effects from Methyl Esters in Oil Mixtures, Gustavo J. Molina, Fnu Aktaruzzaman, Valentin Soloiu, Mosfequr Rahman
Gustavo Molina

Development and Implementation of an Early Introduction to Conceptual Design Class in Mechanical Engineering Curriculum, Gustavo J. Molina
Gustavo Molina

Assessment of the Wear Effects of Low- and High- Speed Jet Impingement of Alumina Nanofluids on Heat-Exchanger Materials, Fnu Aktaruzzaman, Gustavo J. Molina, Valentin Soloiu, Mosfequr Rahman
Gustavo Molina

A Study on Wear Effects from Methyl Esters in Oil Mixtures, Gustavo J. Molina, John Morrison, Emeka Onyejizu, Valentin Soloiu
Gustavo Molina

A Study on Viscosity and Lubricity Effects of N-Butanol and Its Mixtures in Oil, Gustavo J. Molina, J. Morrison, C. Carapia, Valentin Soloiu
Gustavo Molina

Performance of an IDI Engine Fueled with Fatty Acid Methyl Esters Formulated from Cotton Seeds Oil, Valentin Soloiu, Spencer Harp, Channing Watson, Martin Muinos, Sherwin Davoud, Gustavo Molina, Brian P. Koehler, Julia Heimberger, Marcis Jansons, Christopher Butts
Gustavo Molina

Reactivity Controlled Compression Ignition and Low Temperature Combustion of Fischer-Tropsch Fuel Blended with n-Butanol, Valentin Soloiu, Remi Gaubert, Jose Moncada, Justin Wiley, Johnnie Williams, Spencer Harp, Marcel Ilie, Gustavo Molina
Gustavo Molina

Testing of Wear and Erosion Effects of Nanofluids on Metals: New Instruments and Assessment Methodologies, Gustavo J. Molina, Fnu Aktaruzzaman, Valentin Soloiu, Mosfequr Rahman
Gustavo Molina

Investigation of RCCI Combustion with PFI of n-butanol and DI-ULSD compared with Binary Mixtures in an Omnivorous Diesel Engine, Valentin Soloiu, Gustavo J. Molina
Gustavo Molina

Triboemission as a Basic Part of the Boundary Friction Regime, Czeslaw Kajdas, Michael J. Furey, A. L. Ritter, Gustavo J. Molina
Gustavo Molina

Investigation of Low Temperature Combustion Regimes of Biodiesel with n-Butanol Injected in the Intake Manifold of a Compression Ignition Engine, Valentin Soloiu, Marvin Duggan, Henry Ochieng, David Williams, Gustavo Molina, Brian Vlcek
Gustavo Molina

LTC (Low-Temperature Combustion) Analysis of PCCI (Premixed Charge Compression Ignition) with n-Butanol and Cotton Seed Biodiesel Versus Combustion and Emissions Characteristics of Their Binary Mixtures, Valentin Soloiu, Jose D. Moncada, Remi Gaubert, Martin Muinos, Spencer Harp, Marcel Ilie, Andrew Zdanowicz, Gustavo Molina
Gustavo Molina

Preliminary Experimental Study on Erosion and Tribological Effects of Selected Nanofluids, Gustavo Molina, M. Hulett, Mosfequr Rahman, Valentin Soloiu, Charles Walker
Gustavo Molina

Reactivity Controlled Compression Ignition Combustion and Emissions Using N-Butanol and Methyl Oleate, Valentin Soloiu, Jose D. Moncada, Remi Gaubert, Aliyah Knowles, Gustavo Molina, Marcel Ilie, Spencer Harp, Justin T. Wiley
Gustavo Molina

Performance of an IDI Engine Fueled with Fatty Acid Methyl Esters Formulated from Cotton Seeds Oils, Valentin Soloiu, Gustavo J. Molina
Gustavo Molina

Tribological Effects of Alumina-Nanofluids on Heat-Exchanger Materials: Assessment of Jet-Speed and Test-Time Factors, Gustavo J. Molina, Fnu Aktaruzzaman, Mosfequr Rahman, Valentin Soloiu, K. Martin
Gustavo Molina

Wear Effects Assessment of Alumina Nanofluids in a Through-Flow Test-Rig, Gustavo J. Molina, K. Martin, Fnu Aktaruzzaman, Mosfequr Rahman, Valentin Soloiu
Gustavo Molina

Wear from Oil-Dilution by Biodiesels: A Tribometer Study on Effects of Biodiesel Methyl-Ester Components, Gustavo J. Molina, Valentin Soloiu, E. Onyejizu
Gustavo Molina

A Modular Twisted and Coiled Polymer Actuator Unit for Robotic Tentacles, Lianjun Wu, Xuemin Wang
Lianjun Wu

Graphite in Metallic Materials- Growths, Structures and Defects of Spheroidal Graphite in Ductile Iron, Jingjing Qing, Mingzhi Xu
Mingzhi Xu

Effect of Deoxidation and Pouring Practice on the Mechanical Properties of Stage-I Tempered Cr-Ni-Mo Steel, Viraj Athavale, Mingzhi Xu, David Van Aken
Mingzhi Xu

Evolution of Phases in a Graphitic White Iron, Jie Wan, Jingjing Qing, Mingzhi Xu, Perrin Habecker
Mingzhi Xu

Effect of Firing Temperature and Duration on Fused Silica Investment Shell Strength at Room Temperature, Mingzhi Xu, Jingjing Qing
Mingzhi Xu

Filtration Efficiency of Inclusions in Lightweight FeMnAl Steels, Soumava Chakraborty, Laura N. Bartlett, Ronald J. O'Malley, Mingzhi Xu, Koushik Karthikeyan Balasubramanian
Mingzhi Xu

Mechanical Properties and Impact Wear Resistance of 540 Brinell Hardness Mn-Si-Mo-V Steel, Viraj Athavale, Thomas Yaniak, Mingzhi Xu, David Van Aken
Mingzhi Xu

Structure of Spheroidal Graphite Nuclei and Spheroidizing Mechanism of Graphite in Mg-Treated Ductile Iron, Jingjing Qing, Mingzhi Xu
Mingzhi Xu

Designing a Novel Graphitic White Iron for Metal-to-Metal Wear Systems, Jie Wan, Jingjing Qing, Mingzhi Xu
Mingzhi Xu

Designing a Graphitic White Iron: Microstructures and Properties, Jie Wan, Jingjing Qing, Mingzhi Xu
Mingzhi Xu

Developing a Graphitic White Cast Iron, Jie Wan, Jingjing Qing, Mingzhi Xu
Mingzhi Xu

Designing a Graphitic White Iron: Microstructures and Properties, Jie Wan, Jingjing Qing, Mingzhi Xu
Jingjing Qing

Chemistry and Properties of Medium-Mn Two-Stage TRIP Steels, Daniel M. Field, Jingjing Qing, David C. Van Aken
Jingjing Qing

Designing a Novel Graphitic White Iron for Metal-to-Metal Wear Systems, Jie Wan, Jingjing Qing, Mingzhi Xu
Jingjing Qing

Effect of Firing Temperature and Duration on Fused Silica Investment Shell Strength at Room Temperature, Mingzhi Xu, Jingjing Qing
Jingjing Qing

Developing a Graphitic White Cast Iron, Jie Wan, Jingjing Qing, Mingzhi Xu
Jingjing Qing

Evolution of Phases in a Graphitic White Iron, Jie Wan, Jingjing Qing, Mingzhi Xu, Perrin Habecker
Jingjing Qing

Graphite in Metallic Materials- Growths, Structures and Defects of Spheroidal Graphite in Ductile Iron, Jingjing Qing, Mingzhi Xu
Jingjing Qing

Structure of Spheroidal Graphite Nuclei and Spheroidizing Mechanism of Graphite in Mg-Treated Ductile Iron, Jingjing Qing, Mingzhi Xu
Jingjing Qing

A Preliminary Study on Effects of Lubricant Contaminated with Biofuels, Gustavo J. Molina, Valentin Soloiu, S. M. Shanta, C. Hilliard
Valentin Soloiu

A Study on Wear Effects from Methyl Esters in Oil Mixtures, Gustavo J. Molina, John Morrison, Emeka Onyejizu, Valentin Soloiu
Valentin Soloiu

Aerodynamic Performance and Vibration Analyses of Small Scale Horizontal Axis Wind Turbine with Various Number of Blades, Mosfequr Rahman, Emile Maroha, Adel El Shahat, Valentin Soloiu, Marcel Ilie
Valentin Soloiu

A Study on Viscosity and Lubricity Effects of N-Butanol and Its Mixtures in Oil, Gustavo J. Molina, J. Morrison, C. Carapia, Valentin Soloiu
Valentin Soloiu

Aircraft Gas Turbine Noise Reduction Utilizing New Synthetic Fuels and Sound Insulation Materials, Emerald Simons, Valentin Soloiu
Valentin Soloiu

Combustion Analysis of Peanut FAME Blends in an IDI Engine and the Influence of its Primary Fatty Acid Components on the Fuel Characteristics, Valentin Soloiu, A. Covington, J. Lewis, J. Weaver, Christopher Butts, B. Vlcek, Gustavo J. Molina
Valentin Soloiu

Cotton Seed Fame Combustion and Emissions Research in a DI Diesel Engine, Valentin Soloiu, J. Weaver, H. Ochieng, M. Duggan, S. Davoud, S. Harp, Gustavo J. Molina, Brian Vlcek
Valentin Soloiu

Design and Testing of a Jet-Impingement Instrument to Study Surface-Modification Effects by Nanofluids, Gustavo J. Molina, Fnu Aktaruzzaman, Valentin Soloiu, Mosfequr Rahman, K. Martin
Valentin Soloiu

Assessment of Surface Modifications from Interactions of Alumina-Nanofluids on Heat-Exchanger Materials, Fnu Aktaruzzaman, Gustavo J. Molina, Valentin Soloiu, Mosfequr Rahman
Valentin Soloiu

Experiment Design, Instrumentation and Preliminary Camshaft Tribology Studies of an Ethanol Fuelled Otto Engine for Lawn Mower Application, Valentin Soloiu, C. Hilliard, Gustavo J. Molina, B. Vlcek
Valentin Soloiu

Erosion Effects of Nanofluids on Selected Cooling-System Materials, Gustavo Molina, M. Hulett, Mosfequr Rahman, Valentin Soloiu
Valentin Soloiu

Development and Assessment of a New Flow-Through Test Instrument to Study Wear and Erosion Effects of Nanofluids, Gustavo J. Molina, Fnu Aktaruzzaman, Valentin Soloiu, Mosfequr Rahman, Kenshantis Martin
Valentin Soloiu

Erosion-Corrosion Wear of Heat-Exchanger Materials by Water/ethylene-Glycol/alumina Nanofluids, Gustavo J. Molina, Fnu Aktaruzzaman, Valentin Soloiu, Mosfequr Rahman
Valentin Soloiu

Experimental Investigations on the Tribological Effects of Alumina-Nanofluids in a Through-Flow-Test-Rig, Fnu Aktaruzzaman, Gustavo J. Molina, Valentin Soloiu, M. Rahman
Valentin Soloiu

Exploratory Research Work on Tribological Effects of Nanofluids, Gustavo J. Molina, M. Rahman, Valentin Soloiu, C. Walker, M. Hulett
Valentin Soloiu

LTC (Low-Temperature Combustion) Analysis of PCCI (Premixed Charge Compression Ignition) with n-Butanol and Cotton Seed Biodiesel Versus Combustion and Emissions Characteristics of Their Binary Mixtures, Valentin Soloiu, Jose D. Moncada, Remi Gaubert, Martin Muinos, Spencer Harp, Marcel Ilie, Andrew Zdanowicz, Gustavo Molina
Valentin Soloiu

Investigation of RCCI Combustion with PFI of n-butanol and DI-ULSD compared with Binary Mixtures in an Omnivorous Diesel Engine, Valentin Soloiu, Gustavo J. Molina
Valentin Soloiu

Performance of an IDI Engine Fueled with Fatty Acid Methyl Esters Formulated from Cotton Seeds Oil, Valentin Soloiu, Spencer Harp, Channing Watson, Martin Muinos, Sherwin Davoud, Gustavo Molina, Brian Koehler, Julia Heimberger, Marcis Jansons, Christopher Butts
Valentin Soloiu

Performance of an IDI Engine Fueled with Fatty Acid Methyl Esters Formulated from Cotton Seeds Oils, Valentin Soloiu, Gustavo J. Molina
Valentin Soloiu

Simulation of Frictional Effects Due to Engine Oil Contamination with Bio­Fuel, Julian Wallace, James Hennings, Aniruddha Mitra, Valentin Soloiu
Valentin Soloiu

Reactivity Controlled Compression Ignition and Low Temperature Combustion of Fischer-Tropsch Fuel Blended with n-Butanol, Valentin Soloiu, Remi Gaubert, Jose Moncada, Justin Wiley, Johnnie Williams, Spencer Harp, Marcel Ilie, Gustavo Molina
Valentin Soloiu

RCCI Operation with Pfi of N-Butanol and Di of Biodiesel Compared with DI of Binary Mixtures of N-Butanol and Biodiesel, Valentin Soloiu, M. Duggan, J. Weaver, B. Vlcek, S. Harp, Gustavo J. Molina
Valentin Soloiu

Reactivity Controlled Compression Ignition Combustion and Emissions Using N-Butanol and Methyl Oleate, Valentin Soloiu, Jose D. Moncada, Remi Gaubert, Aliyah Knowles, Gustavo Molina, Marcel Ilie, Spencer Harp, Justin T. Wiley
Valentin Soloiu

Tribometry Studies on the Effects of Lubricant Contamination with Biofuels, S. M. Shanta, Gustavo J. Molina, Valentin Soloiu
Valentin Soloiu

Wear Effects Assessment of Alumina Nanofluids in a Through-Flow Test-Rig, Gustavo J. Molina, K. Martin, Fnu Aktaruzzaman, Mosfequr Rahman, Valentin Soloiu
Valentin Soloiu

Wear from Oil-Dilution by Biodiesels: A Tribometer Study on Effects of Biodiesel Methyl-Ester Components, Gustavo J. Molina, Valentin Soloiu, E. Onyejizu
Valentin Soloiu

Small Bore Direct Injection Diesel Engine Operation with Charcoal Diesel Slurries, Valentin Soloiu, J. Lewis, Gustavo J. Molina, B. Vlcek, Y. Yoshihara, K. Nishiwaki
Valentin Soloiu

Testing of Wear and Erosion Effects of Nanofluids on Metals: New Instruments and Assessment Methodologies, Gustavo J. Molina, Fnu Aktaruzzaman, Valentin Soloiu, Mosfequr Rahman
Valentin Soloiu

The Effect of Winglets on the Aircraft Wing Aerodynamics; Numerical Studies Using LES, Marcel Ilie, Matthew White, Valentin Soloiu, Mosfequr Rahman
Valentin Soloiu

Tribological Aspects of a Diesel Injector Operation with Charcoal-Oil Slurries, Valentin Soloiu, Gustavo J. Molina
Valentin Soloiu

Tribological Effects of Alumina-Nanofluids on Heat-Exchanger Materials: Assessment of Jet-Speed and Test-Time Factors, Gustavo J. Molina, Fnu Aktaruzzaman, Mosfequr Rahman, Valentin Soloiu, K. Martin
Valentin Soloiu

Tribological Effects of Mineral-Oil Lubricant Contamination with Biofuels: A Pin-on-disk Tribometry and Wear Study, Sultana M. Shanta, Gustavo J. Molina, Valentin Soloiu
Valentin Soloiu

A Simple Synthesis of Nitrogen-Sulfur Co-Doped Porous Carbon Using Ionic Liquids as Dopant for High Rate Performance Li-Ion Batteries, Mengqi Duan, Yanshuang Meng, Chen Wang, Chaoyu Duan, Fuliang Zhu, Yue Zhang
Yue Zhang

In-Situ Reduction Derived Nitrogen Doped Carbon Anchored Cobalt Nanoparticles as Highly Capacity and Long Life Lithium Ion Battery Anodes, Mingjun Xiao, Yanshuang Meng, Gongrui Wang, Chaoyu Duan, Fuliang Zhu, Yue Zhang
Yue Zhang

In Situ Coating on LiFePO 4 with Ionic Liquid as Carbon Source for High-Performance Lithium Batteries, Jun Xia, Fuliang Zhu, Gongrui Wang, Yanshuang Meng, Yue Zhang
Yue Zhang

Nitrogen Doped Porous Onion Carbon Derived from Ionic Liquids as the Anode Materials for Lithium Ion Batteries with High Performance, Mingjun Xiao, Yanshuang Meng, Chaoyu Duan, Fuliang Zhu, Yue Zhang
Yue Zhang

Co3O4/Carbon Nano-Onions Composite as Supercapacitor Electrode and Its Excellent Electrochemical Performance, Chen Wang, Fuliang Zhu, Gongrui Wang, Mingjun Xiao, Yanshuang Meng, Yue Zhang
Yue Zhang

Nitrogen–Sulfur Co-Doped Porous Carbon Prepared Using Ionic Liquids as a Dual Heteroatom Source and Their Application for Li-Ion Batteries, Mengqi Duan, Yanshuang Meng, Chaoyu Duan, Chen Wang, Fuliang Zhu, Yue Zhang
Yue Zhang

One Step Hydrothermal Synthesis of Flower-shaped Co 3 O 4 Nanorods on Nickel Foam as Supercapacitor Materials and Their Excellent Electrochemical Performance, Chen Wang, Yanshuang Meng, Lei Wang, Fuliang Zhu, Yue Zhang
Yue Zhang

Preparation of Carbon Encapsulated Core-Shell Fe@ CoFe2O4 Particles Through the Kirkendall Effect and Application as Advanced Anode Materials for Lithium-Ion Batteries, Chaoyu Duan, Fuliang Zhu, Mengqi Du, Yanshuang Meng, Yue Zhang
Yue Zhang

Preparation of Co3O4/Nitrogen-Doped Carbon Composite by in Situ Solvothermal with Ionic Liquid and Its Electrochemical Performance as Lithium-Ion Battery Anode, Mingjun Xiao, Yanshuang Meng, Chaoyu Duan, Qianru Hu, Ruinian Li, Fuliang Zhu, Yue Zhang
Yue Zhang

Chapter 2. Tribochemistry. Triboemission of exoelectrons, Gustavo J. Molina, C. Kajdas, K. Hiratsuka, A. Sasaki, R. C. Dante
Gustavo Molina

Low-Energy Triboelectrons and Tribochemistry - A Review, C. Kajdas, Gustavo J. Molina, M. J. Furey, A. L. Ritter, C. Kajdas
Gustavo Molina

Measurement of Electrons Generated During Friction, Gustavo J. Molina
Gustavo Molina

Use of Fuller-Polya Diagram for Teaching Engineering Problem Solving in Undergraduate Design Classes, Gustavo J. Molina
Gustavo Molina

Measurement of Triboemitted Charged Particles from Ceramics and Their General Significance in Tribology, Gustavo J. Molina, Michael J. Furey, A. L. Ritter, C. Kajdas
Gustavo Molina

An Analogy Tool to Visualize Bending-Moment Diagrams, Gustavo Maldonado, Gustavo J. Molina
Gustavo Molina

Charged-Particle Triboemission, Tribocharging and Work Function Change from Scratching of Insulators, Gustavo J. Molina, Michael J. Furey, C. Kajdas
Gustavo Molina

On the Nondestructive Quantification of the Mechanical Response State in a Composite Material Using a Pattern-Recognition Methodology, Y. M. Haddad, Gustavo J. Molina
Gustavo Molina

Triboemission Phenomena and Possible Connections to Tribocatalysis, Gustavo J. Molina, C. Kajdas
Gustavo Molina

Tribochemistry and tribopolymerization, M. J. Furey, C. Kajdas, R. Kempinski, Gustavo J. Molina, B. Vick
Gustavo Molina

Design and Testing of a Jet-Impingement Instrument to Study Surface-Modification Effects by Nanofluids, Gustavo J. Molina, Fnu Aktaruzzaman, Valentin Soloiu, Mosfequr Rahman, K. Martin
Gustavo Molina

Erosion-Corrosion Wear of Heat-Exchanger Materials by Water/ethylene-Glycol/alumina Nanofluids, Gustavo J. Molina, Fnu Aktaruzzaman, Valentin Soloiu, Mosfequr Rahman
Gustavo Molina

Jet-Impingement Effects of Alumina-Nanofluid on Aluminum and Copper, Gustavo J. Molina, Fnu Aktaruzzaman, Whitney Stregles, Valentin Soloiu, Mosfequr Rahman
Gustavo Molina

Erosion Effects of Nanofluids on Selected Cooling-System Materials, Gustavo Molina, M. Hulett, Valentin Soloiu, Mosfequr Rahman
Gustavo Molina

Erosion Effects of Nanofluids on Selected Cooling-System Materials, Gustavo Molina, M. Hulett, Mosfequr Rahman, Valentin Soloiu
Mosfequr Rahman

Tribological Effects of Mineral-Oil Lubricant Contamination with Biofuels: A Pin-on-disk Tribometry and Wear Study, Sultana M. Shanta, Gustavo J. Molina, Valentin Soloiu
Gustavo Molina

On the Mechanism of Electron Triboemission from Ceramics, Gustavo J. Molina, Michael J. Furey, Czeslaw Kajdas, Nils Steika
Gustavo Molina

Importance of Low-Energy Triboelectrons for the Initiation of Tribochemical Reactions, Gustavo J. Molina, Michael J. Furey, A. L. Ritter, C. Kajdas
Gustavo Molina

Frequency Analysis and Modeling of Charged-Particle Triboemission from Ceramics, Gustavo J. Molina, Michael J. Furey, A. L. Ritter, Czeslaw Kajdas
Gustavo Molina

On Triboemission from the Sliding Contact of Si and Ge, Gustavo J. Molina, D. A. Mazilu, M. J. Furey, C. Kajdas
Gustavo Molina

The Role of Triboemission in Tribology: A Review, Gustavo J. Molina, Michael J. Furey, A. L. Ritter, C. Kajdas
Gustavo Molina

The Role of Triboemission in Tribology. A Review, Gustavo J. Molina, Michael J. Furey, C. Kajdas
Gustavo Molina

On the Design of Acousto-Ultrasonics – Pattern-Recognition Classifiers for the Identification of Material Response, Gustavo J. Molina, Y. M. Haddad
Gustavo Molina

Charged Triboemission from Sliding Contacts: Possible Mechanisms and Its Relation with Surface Chemical Processes, Gustavo J. Molina, C. Kajdas, M. Furey
Gustavo Molina

Tribological Aspects of a Diesel Injector Operation with Charcoal-Oil Slurries, Valentin Soloiu, Gustavo J. Molina
Gustavo Molina

Experiment Design, Instrumentation and Preliminary Camshaft Tribology Studies of an Ethanol Fuelled Otto Engine for Lawn Mower Application, Valentin Soloiu, C. Hilliard, Gustavo J. Molina, B. Vlcek
Gustavo Molina

Small Bore Direct Injection Diesel Engine Operation with Charcoal Diesel Slurries, Valentin Soloiu, J. Lewis, Gustavo J. Molina, B. Vlcek, Y. Yoshihara, K. Nishiwaki
Gustavo Molina

Development of a Testing Rig for Erosion with Nanofluids, Gustavo Molina, Mosfequr Rahman
Gustavo Molina

Exploratory Research Work on Tribological Effects of Nanofluids, Gustavo J. Molina, M. Rahman, Valentin Soloiu, C. Walker, M. Hulett
Gustavo Molina

Development of an Instrument for Studies of Charged Triboemission Transport in Gas Atmospheres, Gustavo J. Molina, C. Kajdas, A. Kulczycki
Gustavo Molina

Tribometry Studies on the Effects of Lubricant Contamination with Biofuels, S. M. Shanta, Gustavo J. Molina, Valentin Soloiu
Gustavo Molina

Triboemission Phenomena: Electronic and Photonic Output During Friction Contact and Its Connections to Surface Processes, Gustavo J. Molina, C. Kajdas
Gustavo Molina

Triboemission Phenomena: Electronic and Photonic Outputs from Surface Modification, and Their Use as Novel Probes, Gustavo J. Molina, C. Kajdas
Gustavo Molina

On the Surface Effects of Nanofluids in Cooling-system Materials, Gustavo Molina, Valentin Soloiu, Mosfequr Rahman
Gustavo Molina

On the Triboemission from Selected Ceramics and Semiconductors, Gustavo J. Molina, Michael J. Furey, C. Kajdas
Gustavo Molina

On the Characterization of Material Repeated-Impact States Using a Pattern-Recognition Approach, Y. M. Haddad, Gustavo J. Molina
Gustavo Molina

On the Triboemission from Ceramics and Semiconductors, Gustavo J. Molina, Michael J. Furey, C. Kajdas
Gustavo Molina

On the Application of Thomas and Poisson Branching Point Processes to Triboemission, Gustavo J. Molina, A. L. Ritter, M. J. Furey, C. Kajdas
Gustavo Molina

Triboemission of Charged-Particles and Nanotribology, Gustavo J. Molina, Michael J. Furey, C. Kajdas
Gustavo Molina

Triboemission from Alumina, Single Crystal Sapphire, and Aluminum, Gustavo J. Molina, Michael J. Furey, A. L. Ritter, Czeslaw Kajdas
Gustavo Molina

Triboemission from the Sliding Contact of Alumina Systems, Gustavo J. Molina, Michael J. Furey, B. Vick, A. L. Ritter, C. Kajdas
Gustavo Molina

The Acousto-Ultrasonic Technique for Quantitative Nondestructive Evaluation: A State of the Art Review, Gustavo J. Molina
Gustavo Molina

Integration of Distance Learning Technology into Traditional Engineering Physical Laboratory Exercises, D. Schaefer, D. W. Scott, Gustavo J. Molina, Y. A. Kalaani, T. Murphy, W. Johnson
Gustavo Molina

Importance of Electron Triboemission in Tribochemistry, Gustavo J. Molina, Michael J. Furey, C. Kajdas
Gustavo Molina

Numerical Analysis of Laminar Natural Convection in Rectangular Enclosures of Different Aspect Ratios with and Without Aerosol Nanofluid, Mosfequr Rahman, Andrew Hudson, Gustavo Molina, Valentin Soloiu
Gustavo Molina

High-Vacuum Tribometers: State of the Art and Current Development, Gustavo J. Molina, C. Kajdas, M. Furey, R. McDaniel
Gustavo Molina

On Engineering Students’ Algorithm Insight and Math Manipulation Abilities: A Review, Gustavo J. Molina
Gustavo Molina

On Adhesion Mechanisms and Erosions Effects of Nanoparticle-Suspensions (Nanofluids) on Cooling System Materials, Fnu Aktaruzzaman, Gustavo J. Molina, Valentin Soloiu, Mosfequr Rahman
Gustavo Molina

Effects of Variable Mix on Student Mathematics Performance, G. Clark, A. Mitra, Gustavo J. Molina
Gustavo Molina

Erosion Effects of Nanofluids on Selected Cooling-System Materials, Gustavo Molina, M. Hulett, Mosfequr Rahman, Valentin Soloiu
Gustavo Molina

Numerical Study of Laminar Natural Convection in Square to Shallow Enclosures: Effects of Temperature Gradient and Heat Source, Mosfequr Rahman, Charles Walker, Gustavo Molina, Valentin Soloiu, Mohammad Bhuiyan
Gustavo Molina

Studies on Surface Effects of Nano-Power Suspensions in Cooling- System Materials, Gustavo Molina, Valentin Soloiu, Mosfequr Rahman
Gustavo Molina

Cotton Seed Fame Combustion and Emissions Research in a DI Diesel Engine, Valentin Soloiu, J. Weaver, H. Ochieng, M. Duggan, Sherwin Davoud, S. Harp, Gustavo J. Molina, Brian Vlcek
Gustavo Molina

Computational Analysis of Laminar Natural Convection in Rectangular Enclosures of Different Aspect Ratios with Different Heating Conditions, Mosfequr Rahman, Charles Walker, Gustavo Molina, Valentin Soloiu
Gustavo Molina

Tribological Effects of Nanofluids on Aluminum and Copper, Gustavo Molina, FNU Aktaruzzaman, Whitney Stregles, Valentin Soloiu, Mosfequr Rahman
Gustavo Molina

RCCI Operation with Pfi of N-Butanol and Di of Biodiesel Compared with DI of Binary Mixtures of N-Butanol and Biodiesel, Valentin Soloiu, M. Duggan, J. Weaver, B. Vlcek, S. Harp, Gustavo J. Molina
Gustavo Molina

Development and Updating of a High-Vacuum Tribometer for Particle Triboemission, Gustavo J. Molina, D. Cowart, Michael J. Furey, C. Kajdas
Gustavo Molina

Development and Updating of a High-Vacuum Tribometer for Particle Triboemission, Gustavo J. Molina
Gustavo Molina